This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Excuse me, I have a question. but my English skill is very poor. Please understand me.
I'm university student. I'm studying about TMS320F2812 and F28335.
I want to construct Rotorcraft Unmmaned Aerial Vehicle(UAV) Control System.
I would like to use TMS320F28x as main processor.
And I would like to use DSP/BIOS as RTOS.
Q1. Do you think that this selection is proper? (TMS320F28x + DSP/BIOS as UAV Main System)
Q2. Do you know objective data which provide real-time ability of DSP/BIOS? (paper, journal, material)
Thank you
The C2000 is a good choice for this type of application. If you are looking to use DSP/BIOS, a good starting point would be the User’s Guide:
http://focus.ti.com/general/docs/techdocsabstract.tsp?abstractName=spru625i
http://focus.ti.com/lit/ug/spru423f/spru423f.pdf
There is also an app note available that provides software that runs from both RAM and Flash. There is a DSP/BIOS example for both. This is available at the following link:
http://focus.ti.com/general/docs/techdocsabstract.tsp?abstractName=spra958h
Regards,
Tim Love
The software that is included with SPRA958H (given in above post) uses the ADC of the chip with DSP/BIOS. You can use this as a template. The software and app note are at the following link:
http://focus.ti.com/general/docs/techdocsabstract.tsp?abstractName=spra958h
Regards,
Tim Love