The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP-EXP430G2: Using MSP-EXP430G2 with CCS on Ubuntu

Part Number: MSP-EXP430G2

HI folks,

I found old launchpad MSP-EXP430G2 and tried to use it in a some project. I've tried to connect it to CCS 10 (latest) on Ubuntu 20.04, but it can't be detected. The same board works on the same PC if I use CCS 10 in Windows 10 (can flash and debug).

I checked output of lsusb in Ubuntu, which indicates that USB drivers are in place. Does anyone have a hint why I can't load binary and run debugger in Ubuntu?


**Attention** This is a public forum