MSP-FET: MSP-FET Flash Emulation Tool programming Issue

ROHIT SAINI

Prodigy 20 points

Part Number: MSP-FET
Other Parts Discussed in Thread: MSP430F5437A, UNIFLASH

I am Using Black FET tool for programming purpose. but now i am facing issue while programming.

In MSP-FET Flash Emulation Tool Green and RED LEDs glowing one after another contionously.

is anyone know what exactly the issue with my FET and how can i resolve this issue.

Controller - MSP430F5437A.

Programming Tool - Uniflash

over 4 years ago

0 Dennis Lehman over 4 years ago

TI__Guru 68151 points

Hello Rohit,

There is a similar posting that discusses how to "re-boot" the MSPFET. Give that a try.

0 ROHIT SAINI over 4 years ago in reply to Dennis Lehman

Prodigy 20 points

can u please share that link if possible

0 Dennis Lehman over 4 years ago in reply to ROHIT SAINI

TI__Guru 68151 points

Hi Rohit,

My apologies on that.

See section 5.6.5.3 in the MSP Debuggers User's Guide.

0 Dennis Lehman over 4 years ago in reply to Dennis Lehman

TI__Guru 68151 points

Hi Rohit,

I haven’t heard from you for a couple of days now, so I’m assuming you were able to resolve your issue.
I'll change the status of this posting to RESOLVED, but if this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information.
If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP-FET: MSP-FET Flash Emulation Tool programming Issue