MSP430F67651A: how to program MSP430

Jerry Kuo

Expert 3605 points

Part Number: MSP430F67651A
Other Parts Discussed in Thread: UNIFLASH,

Hi team,

sorry, I am new for MSP430.

OEM Customer got two hex files from their customer. How could OEM customer use them for manufacturing ?

BSLxxx.hex
FWxxx.hex

Could Uniflash directly import above two hex files, then flash MSP430F67651A at one time ?

Should customer merge above two hex files into one binary file first ? If needed, how to do this ?

4 months ago

0 Xiaodong LI 4 months ago

TI__Mastermind 21475 points

Hi Jerry Kuo

Please check Program the device on

https://software-dl.ti.com/ccs/esd/uniflash/docs/v5_0/quick_start_guide/uniflash_quick_start_guide.html

I think both method are OK.

Thanks

0 Jerry Kuo 4 months ago in reply to Xiaodong LI

TI__Expert 3605 points

Hi Xiaodong,

Thanks for your sharing. However, above link doesn't describe for MSP430. (only mention MSPFlasher mode).

I used Uniflash for connect wireless MCU (CC26xx, CC32xx etc.). But I am knew for MSP430. Could you provide one complete document for MSP430 programing information ?

Thank you.

0 Xiaodong LI 3 months ago in reply to Jerry Kuo

TI__Mastermind 21475 points

Hi Jerry Kuo

>> Could you provide one complete document for MSP430 programing information ?

Please check UG on https://www.ti.com/lit/ug/slau799b/slau799b.pdf

Thanks!

0 Xiaodong LI 3 months ago in reply to Xiaodong LI

TI__Mastermind 21475 points

Thanks for your phone discussion!

Could you please check with customer the issue PPM and the clock source detailed?

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F67651A: how to program MSP430