MSP430G2231: Uniflash is not running on all computers

What about try Lite FET-Pro430 Elprotronic. It is another MSP430 programm tool

I am have MSP-EXP430G2ET and I don't have Lite FET-Pro430 Elprotronic tool.

 I am using it to program the MCU on board via Uniflash. But getting "Error connecting to the target" on few computers.

This is a software, can also support MSP-EXP430G2ET. Can you do some search from Internet?

Thanks for the reply.

Yes, did some search. 2 Days back download link was redirecting me to the same page. 

But today I found another link, downloading it today.

Can I use give some reason why Uniflash is behaving like this ? I mean there should be some reason for not working some PCs.

I really don't know. I only supoort MSP430. From my understanding Uniflash is build based on Java and for all TI products. FET-Pro430 is build on C++, and only for MSP430, which means it need less sw lib support.

Lite FET-Pro430 Elprotronic installed only for 15 days trail and have to purchase license after that. I don't to purchase any of these when have launchpad and Uniflash.

Please provide any suggestion/solution to run Uniflash.

You can find free version on Internet for Lite FET-Pro430 Elprotronic. 

See from the screen shot, it seem that the Uniflash can recognize the debugger, but can't find the IC. If you want to further analysis the problem, can you catch the wave on SBWTDIO and SBWTCK?