Tool/software:
Can i give TACLK 30 MHz clk from a crystal for the working of timer.
Tool/software:
Can i give TACLK 30 MHz clk from a crystal for the working of timer.
Short answer: No.
Per datasheet (SLAS541M) Sec 8.35, TACLK is limited to 16MHz (at 3V).
Also, there's no crystal oscillator circuit associated with P1.0, so you'd need to construct that externally, and feed its output (single-ended) to the pin, a.k.a. an external clock.
Bruce beat me: Nope
Here is the relevant section:
The Data Sheet is your friend.
**Attention** This is a public forum