• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 77 subscribers
  • Views 833 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430: Trouble Writing Memory Block at 0xffee on Page 0 of Length 0x2: Could not write device memory

SACHIN Kumar
Prodigy 20 points

Hi,

Am just a beginner with MSP 430G2533 , i am facing the below issue

MSP430: Trouble Writing Memory Block at 0xfffe on Page 0 of Length 0x2: Could not write device memory

I am using Windows8 Pro and Version of CCS is  Version: 5.2.0.00069

Kindly Help ASAP

 

  • 0
    Guru 227245 points

    A possible reason for this is that you try to write to flash with insufficient supply voltage (even if high enough for normal operation). Also, a weak supply could be the reason, which breaks down a bit in the moment the high flash write current is required.
    However, if you use the G2553 on the LaunchPad, this shouldn't be an issue.

**Attention** This is a public forum