CCS/msp430f6435: MSP430: Trouble Writing Memory Block at 0x8000 on Page 0 of Length 0x666: Could not erase device memory

Suraj Jagtap

Intellectual 305 points

Part Number: MSP430F6435
Other Parts Discussed in Thread: MSP-FET

Tool/software: Code Composer Studio

how to resolve this problem??

over 8 years ago

0 Suraj Jagtap over 8 years ago

Intellectual 305 points

Try to update firmware

0 Katie Pier over 8 years ago in reply to Suraj Jagtap

TI__Guru 73196 points

Hi Suraj,

Can you provide more information on the hardware and programming tool that you are using? Is it a TI target board, or a custom board, and do you use the MSP-FET tool?

Regards,
Katie

0 Wei.Jetim Zhao over 8 years ago

TI__Genius 13215 points

I haven't heard from you for along time and I will close this thread in our tracking matrix. You can still send your message here when you come back.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/msp430f6435: MSP430: Trouble Writing Memory Block at 0x8000 on Page 0 of Length 0x666: Could not erase device memory