This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

msp430fr5729 problem

Other Parts Discussed in Thread: MSP430FR5729

i develop flow meter using msp430fr5729. this device calculate frequency from input pulse using capture,it also count pulse and generate pwm from frequency,it also store data at nearly 1 sec period.,and give response on modbus

code is running nearly 10 to 15 min and then its hang. when i stop debugger i found pointer at this instruction.which looks like below

0x10002 : 3FFF JMP 0x10002;

due to this code hang. and this location is outside of FRAM limit.

i tryed but can not find solution.

in which condition execution jump to this location??

here i attach my  ccsv5 project folder in zip format. can any one help?

**Attention** This is a public forum