This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

how to program msp430f5151

Other Parts Discussed in Thread: MSP430F5151, MSP430G2553


I have to working on msp430f5151 controller. Till now i have work on MSP430G2553 launchpad. but now i have to use MSP430F5151. Now i am facing problem to load program in MSP430F5151. 

How to do this?

  • Hi Pra,

    The MSP430F5151 supports Spy-Bi-Wire, so you can use the ezFET tool on the Launchpads.  Simply connect power, TST (called SBWTCK in the F5151 d/s), RST(named SBWTDIO), and ground lines from the ezFET on a Launchpad to the target MSP430F5151's lines.


    This method works for MSP430s that support Spy-Bi-Wire.  For all MSP430s, we have a JTAG development tool here:


    Set the target as an MSP430F5151 in your IDE and program like you would with the MSP430G2553.



**Attention** This is a public forum