MSP432E401Y: What development kit would be more suitable for my application ?

Mario NDAYRA

Part Number: MSP432E401Y

Hello,
We are looking for a development kit that would be convinient to do the following:
read a number of gpi's ( 16 to 32 ) and generate different audio tones depending on what gpi is being triggered.
we would also like to have an ethernet connection and maybe usb/uart/and spi.
Your help/advice in choosing a dev kit is very apreciated thanks

Mario

over 5 years ago

0 Dietmar Walther over 5 years ago

TI__Genius 14165 points

Hi Mario,

why not ordering the launch pad
www.ti.com/.../msp-exp432e401y

0 Mario NDAYRA over 5 years ago

Prodigy 60 points

The audio output format must be AES/EBU and also analog is needed.

0 Mario NDAYRA over 5 years ago in reply to Dietmar Walther

Prodigy 60 points

Hello, thanks for the reply
The audio output format must be AES/EBU and also analog is needed.
would MSP432E401Y include some useful libs/tools to do that ?
Thanks

0 Dietmar Walther over 5 years ago in reply to Mario NDAYRA

TI__Genius 14165 points

Hi Mario,
maybe the audio booster pack might help here.

www.ti.com/.../BOOSTXL-AUDIO

Regarding lib support I'm not sure if we have libs. Let me check.

0 Dietmar Walther over 5 years ago in reply to Dietmar Walther

TI__Genius 14165 points

Hi Mario,
did the replies helped you, if not please let us know otherwise I will close this thread due to inactivity.

0 Mario NDAYRA over 5 years ago in reply to Dietmar Walther

Prodigy 60 points

Hello Dietmar,

I bought the MSP432E401Y, this would be perfect for ethernet and GPIOS, but still didn't sort out the audio Part of the project, MSP432E401Y doesn't have an I2S interface for audio DACS, and I'm still looking for an SPI / I2C dual channel audio DAC (16 - 24 bits) and how to interface it. Any Advice or help would be very apreciated thanks.

0 Dietmar Walther over 5 years ago in reply to Mario NDAYRA

TI__Genius 14165 points

Hi Mario,

did you already posted this in the audio forum?
e2e.ti.com/.../6

0 Dietmar Walther over 5 years ago in reply to Dietmar Walther

TI__Genius 14165 points

Hi Mario,

sorry for provding not the right informaiton on the controller you need hope you had more success in the audio forum.
Due to inactivity since a week I will close this thread.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP432E401Y: What development kit would be more suitable for my application ?