MSP-EXP430FR2311: Programming an MSP430FR2000 with a launchpad

BTek

Part Number: MSP-EXP430FR2311
Other Parts Discussed in Thread: MSP430FR2000, , ENERGIA, MSP-EXP430FR2433

Hi team,

I have an MSP430FR2000 on a custom board, would it be possible to program it by jumping over the SBWTCK and SBWTDIO pins from the MSP-EXP430FR2311 Launchpad?

over 5 years ago

0 Wei.Jetim Zhao over 5 years ago

TI__Genius 13215 points

Hi Baldeep,

Sure, you could use the eZ-FET on board to program your MSP430FR2000. Please refer below document to set up the connection:
www.ti.com/.../slau664b.pdf

0 BTek over 5 years ago

Prodigy 20 points

Two follow up questions

1. If I jumper the connection from the MSP-EXP430FR2311 to the MSP430FR2000 can I use Energia to program it?

2. Can I use the MSP-EXP430FR2433 to program the MSP430FR2000?

0 Wei.Jetim Zhao over 5 years ago in reply to BTek

TI__Genius 13215 points

Hi Baldeep,

1. It should work.
2. Sure

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP-EXP430FR2311: Programming an MSP430FR2000 with a launchpad