MSP432P401R: Kentec Touch Display to Laptop

Esteban Montanez

Part Number: MSP432P401R

I am working with Voice Detection Software using the MSP432P401R along with BOOSTXL-AUDIO and KENTEC Touch display. Is there any way to be able to output the information from Kentec Touch display to my laptop.

over 5 years ago

0 Keith Barkley over 5 years ago

Guru 37375 points

If you are using the red launchpad, you can use the back channel UART.

0 Esteban Montanez over 5 years ago in reply to Keith Barkley

Prodigy 50 points

Can you provide example on how to do this. I want to be able to display the text output coming seen on Kentec touch display on my laptop

0 Keith Barkley over 5 years ago in reply to Esteban Montanez

Guru 37375 points

while I am not sure if it works with the Kentec*, the display example under drivers is probably the easiest, then you just use Display_printf().

* It does not matter since you just want just the serial output, anyway.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP432P401R: Kentec Touch Display to Laptop