This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430F6779A: Power Factor, Reactive Power and Apparent Power reading incorrectly.

Part Number: MSP430F6779A
Other Parts Discussed in Thread: TIDM-3PHMTR-TAMP-ESD

Tool/software: Code Composer Studio

We are working on the wireless energy analyzer. We are using the TIDM-3PHMTR-TAMP-ESD reference design. Besides, we are use software from energy measurement design sdk tool from texas intsruments. But we have a problem. Power factor, reactive power and apparent power are constantly read incorrectly. We have implemented all the calibration steps. Vrms, Irms and active power is correct. But reactive power, power factor and apparent power are constantly read incorrectly.

Hardware Reference Documents:

SDK Reference:

**Attention** This is a public forum