This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F5528: MSP430 Overheating and not connecting Via JTAG

Part Number: MSP430F5528
Other Parts Discussed in Thread: MSP-FET

I've attached a schematic of how our PCB has the power supplied to the MSP. According to all documentation, I think I've wired it correctly but it seems to just get extremely hot and the MSP-FET can't communicate with the device. There's a 3.3 regulator and diodes which ensure back flow doesn't happen. Please let me know what I'm doing wrong.

Thank you 

**Attention** This is a public forum