Other Parts Discussed in Thread: CONTROLSUITE
Hi All, i see there is a pscpice transient analysis model available for DRV8307. can anyone please let me know if there are allegro layout files also available for the same or for the EVM?
thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi All, i see there is a pscpice transient analysis model available for DRV8307. can anyone please let me know if there are allegro layout files also available for the same or for the EVM?
thanks
Hi Siddharth,
Please see attached file. Let me know if that is not what you needed.
Thanks for the reply. I see that the DRV8307 has max operating range till 32v. So I guess the max phase to gnd voltage that can be generated from it is 32v?
If I need to have a phase to gnd voltage of 100v then what is the solution ?
Thanks
For example : if the electric vehicle battery voltage is 300v then how do we efficiently use DRV8307 as its max supply voltage is 42v i guess.
hi all. request your feedback please
please let me know where the schematic / layout files location for BLDC motor application for below part ?
www.ti.com/.../TMDSHVMTRPFCKIT
Thanks for the reply Rick, thanks a lot for the reply. It will be nice if i can see the schematic and layout before downloading & installing the software , so can you please send me the schematic?
Thanks for the reply Rick, thanks a lot for the reply. It will be nice if i can see the schematic and layout before downloading & installing the software , so can you please send me the schematic?
Hi Siddharth,
Please see attached. These are from version 2.1, but I believe the board is the same.
PCB:
Schematic:
thank you very much for the schematic Rick, i see the PCB: line as blank, did you send any link for that as well ? It doesn't appear to come through.