Texas Instruments (TI) Motor drivers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search motor drivers IC content or ask technical support questions on everything from brushless DC (BLDC) and brushed DC (BDC) motor drivers to stepper motor and other drivers for precise motor control. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
The TI processors wiki where the download links for the GUI composer v1 (GCv1) runtime were stored has been decommission as of January 15, 2021.
The GCv1 download links have been moved to this website: https://software-dl.ti.com/ccs/esd/documents/gc_downloads_v1runtime…
Other Parts Discussed in Thread: DRV8412 Thermoelectric cooling (TEC) elements, or a Peltier device, require a H-bridge to control the direction of current flowing through the device. As current flows through the device, one side of the device becomes…
Stepper motors are known to generate audible noise as they operate, which is undesirable for many applications. What are the root causes of the audible noise?
The root causes of the stepper motor audible noise could come from mechanical factor, magnetic…
Motor drivers E2E forum
Texas Instruments (TI) Motor drivers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search motor drivers IC content or ask technical support…
In motor systems, voltage spikes and ringing noise can appear on the output terminals. These spikes can degrade the performance of the motor system, increase EMI noise, and even cause damage if not controlled.
Switch-node ringing noise is the results…
Two common interfaces used to control brushed DC motors are Phase/Enable (PH/EN) and PWM. Both of these interfaces require 2 signals to be able to fully control brushed DC motors or other types of load connected to the outputs of a motor driver.
Phase…
Other Parts Discussed in Thread: DRV8313 , DRV8312 , DRV8332 , DRV10964 , DRV10970 , DRV10974 , DRV10975 , DRV10983 , DRV10983-Q1 , DRV10987 Understanding the parameters of a motor is very important in selecting a motor driver as the rating of the FETs…
Other Parts Discussed in Thread: TMS320F280049C , DRV832X
When using a BLDC motor driver with SPI, it is important to setup the SPI settings correctly from the MCU to match the format needed and communicate with the DRV device properly. This FAQ…
Part Number: DRV2700 When using the DRV2700 in it’s flyback configuration there are multiples things to consider when trying to approximate what your output will be. Here is the flyback configuration circuit found in the DRV2700 Datasheet:
First…
Part Number: DRV2625 Other Parts Discussed in Thread: DRV2624 , DRV-ACC16-EVM Achieving the right recording set-up is crucial in understanding the haptic effects produced by our haptic driver chip
Here are a few things to keep in mind when putting together…
