hi team:
i want to quote another trend for more discussion. Previous link::https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1113645/tps65265-enable-function-mode-uvlo-setting-logic
In these days, i did some tests on the EVM board and have some confusion. here attached my test details.
The question is:
1.Why EN> 1.22V and VIN >8.6V ,mode connect to GND will comes with no output?
2.Changing the R23/24/25 to higher resistance will comes with output ,but increase the Vin do not have improvement.
Your report is very appreciates.