• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 57 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS23734: TPS23734 and Mosfet is Heating when connect the Load

Sandeep Kumar2
Prodigy 40 points
Part Number: TPS23734
Other Parts Discussed in Thread: PMP23278

Hi, I am using the TPS23734 and switching mosfet is heating when connect the load 50mA.POE-TPS23734RMTR.pdf

  • 0
    TI__Mastermind 19231 points

    Hi Sandeep,

    Thanks for reaching out.

    I am wondering if you want to use a active clamping forward structure. If so, please refer PMP23278 reference design for the secondary side and the transformer.

    https://www.ti.com/tool/PMP23278

    Best regards,

    Diang

  • 0
    Prodigy 40 points

    Hi Diang,

    I have add the secondary  circuit which is used in PMP23278 reference design and on the power IC TPS23734 is Instantly not work I remove the secondary circuit and change the IC after that we have added a diode (40V/3Amps) to transformer output and then connect the secondary circuit the circuit is working fine but IC is heating without load.

    Both reference Images is attached.

    Circuit used in Secondary SideAdded Diode at Output

    Regards,

    Sandeep Kumar

  • 0 in reply to Sandeep Kumar2
    TI__Mastermind 19231 points

    Hi Sandeep, 

    Thanks for your information.

    I think the transformer you selected (PA2467NL) is for flyback converter instead of forward converter. I think the transformer may cause the failure when you use PMP23278's secondary side.  

    If you want to use the forward converter, I would recommend you to change the transformer as well.

    Best regards,

    Diang