Hello Sir/Madam,
Can you please suggest me the output capacitor and inductor value for 12 to 1.8V output with switching frequency of 2.2Mhz?
Regards,
Saikumar
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Sir/Madam,
Can you please suggest me the output capacitor and inductor value for 12 to 1.8V output with switching frequency of 2.2Mhz?
Regards,
Saikumar
Hi Saikumar,
I would not recommend running this device at 2.2MHz. The first is due to minimum on time will be violated with the conversion from 12VIN to 1.8V output.
Here is one sample design with 500kHz for 5A
https://webench.ti.com/appinfo/webench/scripts/SDP.cgi?ID=317E7336833B32A0
Thanks
-Arief
Hi Arief,
Thanks for the quick response. What would be the suggested frequency value?
I'm planning to use this regulator for 2 different output values: 12 to 3.3V and 12 to 1.8V.
Regards,
Saikumar
Hi,
I would suggest a frequency value of 400kHz just to increase efficiency and avoid the minimum on time condition.
You can use webench to see the design components
Thanks
-Arief