Hi,
Is there requirement voltage between Vin and Vout? e.g. will it support Vout = 3.3V when Vin = 4.2V?
I understand TLV62585 support 100% duty. But could you please let me confirm if the device support Vout = Vout case?
Regards,
Nagata.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Is there requirement voltage between Vin and Vout? e.g. will it support Vout = 3.3V when Vin = 4.2V?
I understand TLV62585 support 100% duty. But could you please let me confirm if the device support Vout = Vout case?
Regards,
Nagata.
Hello Nagata,
Thank you for your question.
Given proper schematic and layout, the device shouldn't have any problem to support Vout = 3.3V when Vin = 4.2V.
For schematic reference, please feel free to refer to our WEBENCH® POWER DESIGNER
Do you mean: "But could you please let me confirm if the device support Vout = Vin case?"
To answer this question, you could refer to the device datasheet :
In the case of a limited headroom, you should pay attention to VIN ripple that in same cases could bring the input voltage below the minimum value.
Please ask again if you have any more questions.
Thanks,
Stefano
All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml).
Hello Nagata,
Did my answer clarify your question?
Do you need further support?
Please let me know.
Thanks,
Stefano
All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml).