• State
  • Locked Locked
  • Replies 4 replies
  • Subscribers 103 subscribers
  • Views 135 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320C6457: Code Composer Custom Platform.

Fabio Schina
Intellectual 470 points
Part Number: TMS320C6457

Good mornig,

i've a problem with CCS 8.3.1 during Platform addition.

In particoular, i've define a pltafor in a specific folder of my project and it is not listed il a drop down list of platform in build settings General Platform.

I've added other Repository for add my platform folder, but isn't listed.

Why my platform is not listed in drop down list?

Is ther a demo to define and specify dedicated plplatform?

Thanks in advace 

Fabio

  • 0
    TI__Guru 73785 points

    Hello Fabio,

    Please note that TMS320C6457 has no design support as per the product page, so we will not be able to offer any support from a hardware or software design standpoint. I am sending your question to the CCS team to see if they have any comments.

    Regards,

    Nick

  • 0
    TI__Guru**** 423750 points

    Hello Fabio,

    Are you referring to RTSC platforms? Are you trying to create a custom RTSC platform file?

  • 0 in reply to Ki
    Intellectual 470 points

    Hello ki,

    yes, we have defined a new RTSC platform.

    Then when i try to select the platform in my project, il a drop down list of platform, my custom platform previous defined is not listed. Why? it Seem that in CCS 5.3 this sequence work correctly.

    More over Ki, i want to ask an help in order to find an Udp Example to try in my board with C6457. I wrote to TI but we don't have responce. 

    Can you indicate where is possible to obtain a simple example that use udp. I have downloaded pakage bios_mcsdk_1_00_00_08_setup, because i use CCS 5.3 with SYS BIOS 6.34.

    This package install NDK,SDK,PDK. But i dont find a possible example to use in order to verify Ethernet on my board with C6457.

    Can you help me with same indication or link?

    Thanks

    Fabio

  • 0 in reply to Fabio Schina
    TI__Guru**** 423750 points

    Unfortunately you are using several packages that have been deprecated in support (NDK, RTSC, etc). These packages are beyond my area of expertise. I will bring this thread to the attention of the device experts for any further input.