TDA2E: Image sensor input interface and USB output protocol.

Ranny

Part Number: TDA2E

Hi Sir,

I have two projects and hope to use the same processor,

Two projects use different image sensor input interface, one is MIPI 2-Lane/4-lane and another one is Parallel (DVP) .

Could TDA2E support MIPI and DVP interface at the same time?

Could TDA2E support USB3.0 to output Image Sensor RAW data and YUV data?

If TDA2E SDK can support UVC protocol throw USB3.0 connector that should be great.

Thanks

Ranny.

0 Brijesh Jadav over 2 years ago

Hi Ranny,

I can help in the first question.

Yes, TDA2Ex can support MIPI interface using CAL module and DVP interface using VIP module.

Regards,

Brijesh

0 Ranny over 2 years ago in reply to Brijesh Jadav

Hi Brijesh,

Do CAL and DVP interface share the same pins or not?

I want to design both interface on a same PCB.

+1 Brijesh Jadav over 2 years ago in reply to Ranny

Yes, MIPI and DVP pins are not shared..

0 Ranny over 2 years ago in reply to Brijesh Jadav

Hi Brijesh,

How many input data bits can be received with DVP interface?

Thanks.

Ranny.

+1 Brijesh Jadav over 2 years ago in reply to Ranny

Hi Ranny,

VIP input port can support at max 24bits per pixe, ie RGB24 input, provided that pins are available.

Regards,

Brijesh

Processors forum