TDA2E: Processors forum

Chung Cheng Ho

Intellectual 570 points

Part Number: TDA2E
Other Parts Discussed in Thread: MMWCAS-DSP-EVM

Hi Sir

I am using CCS12 to load those bin files to MMWCAS-DSP-EVM. But, I can not get the program run due to the break points.

I am not sure why are those break poins was setted.

I did not find the "GEL “Scripts -> EVE MMU Config -> EVE_MMU_Config” either.

Thanks!

Jack

7 months ago

0 Praveen Rao 7 months ago

TI__Mastermind 30001 points

Hi,

As our expert is on leave till Dec 15, the response will be delayed.

Thanks.

0 Chung Cheng Ho 6 months ago in reply to Praveen Rao

Intellectual 570 points

Hi Rao

I see. Hope they can give the resolution once they are back.

Jack Ho

0 Praveen Rao 6 months ago in reply to Chung Cheng Ho

TI__Mastermind 30001 points

Hi Chung, Understood, Thanks for your patience.. lets wait for the expert to be back from vacation. (Dec 15th).

Thanks.

0 Stanley Liu 6 months ago in reply to Praveen Rao

TI__Guru 50045 points

Since the user guide is very old, the script has been updated and it was not reflected.

The EVE MMU config is executed as part of MULTICORE initialization from GEL option.

0 Chung Cheng Ho 6 months ago in reply to Stanley Liu

Intellectual 570 points

Hi Stanley

Then, which version Radar STK I should look for? Or, Which user guide I should look for? I guess the EVE MMU already got initi by the GEL file.

I am looking for a workable suggestion steps. Thanks!

Jack Ho

0 Stanley Liu 6 months ago in reply to Chung Cheng Ho

TI__Guru 50045 points

Which core are you trying to run the program? Was it C66?

I see it stops at main which is expected since there is an auto run to main option which is set by default.

You just need to hit run again to resume the PC execution.

0 Chung Cheng Ho 6 months ago in reply to Stanley Liu

Intellectual 570 points

Hi Stanley

I wish to see some thing come out from RS232 port just as the same boot from SD card.

Because the break points, it will stop at the same code place after I press the resume or restart button on CCS.

thanks

Jack Ho

0 Stanley Liu 6 months ago in reply to Chung Cheng Ho

TI__Guru 50045 points

I am not following the issue you are having exactly.

Could you please list the exact steps you have followed to the point where you are hitting the breakpoint?

Please provide screenshots of CCS from each step.