This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM3352 CCS SYS/BIOS example hello does not compile and link

Other Parts Discussed in Thread: AM3352, LM3S1133, LM3S1162, LM3S1138, LM3S1165, LM3S1150, LM3S1332, LM3S1512, LM3S1439, LM3S1608, LM3S1607, LM3S1601, LM3S1538, LM3S1626, LM3S1627, LM3S1625, LM3S1635, LM3S1776, LM3S1751, LM3S1637, LM3S1911, LM3S1918, LM3S1937, LM3S1958, LM3S1960, LM3S1968, LM3S2139, LM3S2276, LM3S2110, LM3S2412, LM3S2601, LM3S2651, LM3S2620, LM3S2608, LM3S2616, LM3S2678, LM3S2671, LM3S2739, LM3S2776, LM3S2911, LM3S2918, LM3S2950, LM3S2965, LM3S2948, LM3S300, LM3S301, LM3S315, LM3S310, LM3S316, LM3S308, LM3S3651, LM3S328, LM3S3739, LM3S317, LM3S3634, LM3S3749, LM3S3748, LM3S5632, LM3S5732, LM3S5739, LM3S5747, LM3S5749, LM3S600, LM3S601, LM3S611, LM3S608, LM3S6100, LM3S610, LM3S612, LM3S613, LM3S615, LM3S617, LM3S618, LM3S6537, LM3S6432, LM3S6618, LM3S6610, LM3S6611, LM3S6911, LM3S6753, LM3S6730, LM3S6965, LM3S6952, LM3S6938, LM3S6950, LM3S6918, LM3S812, LM3S811, LM3S801, LM3S800, LM3S808, LM3S8530, LM3S818, LM3S828, LM3S817, LM3S815, LM3S8738, LM3S8933, LM3S8970, LM3S8962, LM3S8938, LM3S8930, SYSBIOS, LM3S8971, TMS320DM8168, TMS320DM8148, TM4C1290NCPDT, TM4C1290NCZAD, TM4C1294NCZAD, TM4C1294NCPDT, TM4C1292NCPDT, TM4C1292NCZAD, TM4C129CNCPDT, TM4C129CNCZAD, TM4C129DNCPDT, TM4C129DNCZAD, TM4C129ENCPDT, TM4C129ENCZAD, AM3359, AM3354, OMAP3503

I was trying to get some example code working to make sure my environment was setup correctly with CCS and the RTOS.

If I compile the non-RTOS hello example it compiles just fine however the SYS/BIOS hello world example errors out with "unsupported device". See output below.

I am sure this is a simple setup issue. I have the latest CCS, RTOS and AM335x starter kit  installed. The goal is to build for a generic AM3352 configuration.

Thanks,

Aaron

**** Build of configuration Debug for project rtostest ****

"C:\\ti\\ccsv5\\utils\\bin\\gmake" -k all
'Building file: ../hello.cfg'
'Invoking: XDCtools'
"C:/ti/xdctools_3_25_00_48/xs" --xdcpath="C:/ti/bios_6_35_01_29/packages;C:/ti/tirtos_1_10_00_23/packages;C:/ti/tirtos_1_10_00_23/products/bios_6_35_01_29/packages;C:/ti/tirtos_1_10_00_23/products/ipc_1_25_03_15/packages;C:/ti/tirtos_1_10_00_23/products/ndk_2_22_03_20/packages;C:/ti/tirtos_1_10_00_23/products/uia_1_03_00_02/packages;C:/ti/ccsv5/ccs_base;" xdc.tools.configuro -o configPkg -t ti.targets.arm.elf.M3 -p ti.platforms.stellaris:AM3352 -r release -c "C:/ti/ccsv5/tools/compiler/arm_5.0.4" --compileOptions "-g --optimize_with_debug" "../hello.cfg"
making package.mak (because of package.bld) ...
generating interfaces for package configPkg (because package/package.xdc.inc is older than package.xdc) ...
configuring hello.xem3 from package/cfg/hello_pem3.cfg ...
The AM3352 device is not currently supported.
The following devices are supported in the ti.catalog.arm.cortexm3 catalog:
CortexM3 F28M35x LM3S101 LM3S102 LM3S1110
LM3S1133 LM3S1138 LM3S1150 LM3S1162 LM3S1165
LM3S1166 LM3S1332 LM3S1435 LM3S1439 LM3S1512
LM3S1538 LM3S1601 LM3S1607 LM3S1608 LM3S1620
LM3S1621 LM3S1625 LM3S1626 LM3S1627 LM3S1635
LM3S1636 LM3S1637 LM3S1651 LM3S1751 LM3S1776
LM3S1811 LM3S1816 LM3S1850 LM3S1911 LM3S1918
LM3S1937 LM3S1958 LM3S1960 LM3S1968 LM3S1969
LM3S1B21 LM3S1J11 LM3S1J16 LM3S1N11 LM3S1N16
LM3S1P51 LM3S1R21 LM3S1R26 LM3S1W16 LM3S1Z16
LM3S2016 LM3S2108 LM3S2110 LM3S2139 LM3S2276
LM3S2410 LM3S2412 LM3S2432 LM3S2533 LM3S2601
LM3S2608 LM3S2616 LM3S2620 LM3S2637 LM3S2651
LM3S2671 LM3S2678 LM3S2730 LM3S2739 LM3S2776
LM3S2793 LM3S2911 LM3S2918 LM3S2919 LM3S2939
LM3S2948 LM3S2950 LM3S2965 LM3S2B93 LM3S300
LM3S301 LM3S308 LM3S310 LM3S315 LM3S316
LM3S317 LM3S328 LM3S3634 LM3S3651 LM3S3739
LM3S3748 LM3S3749 LM3S3826 LM3S3J26 LM3S3N26
LM3S3W26 LM3S3Z26 LM3S5632 LM3S5651 LM3S5652
LM3S5656 LM3S5662 LM3S5732 LM3S5737 LM3S5739
LM3S5747 LM3S5749 LM3S5752 LM3S5762 LM3S5791
LM3S5951 LM3S5956 LM3S5B91 LM3S5K31 LM3S5K36
LM3S5P31 LM3S5P36 LM3S5P51 LM3S5P56 LM3S5R31
LM3S5R36 LM3S5T36 LM3S5Y36 LM3S600 LM3S601
LM3S608 LM3S610 LM3S6100 LM3S611 LM3S6110
LM3S612 LM3S613 LM3S615 LM3S617 LM3S618
LM3S628 LM3S6420 LM3S6422 LM3S6432 LM3S6537
LM3S6610 LM3S6611 LM3S6618 LM3S6633 LM3S6637
LM3S6730 LM3S6753 LM3S6816 LM3S6911 LM3S6916
LM3S6918 LM3S6938 LM3S6950 LM3S6952 LM3S6965
LM3S800 LM3S801 LM3S808 LM3S811 LM3S812
LM3S815 LM3S817 LM3S818 LM3S828 LM3S8530
LM3S8538 LM3S8630 LM3S8730 LM3S8733 LM3S8738
LM3S8930 LM3S8933 LM3S8938 LM3S8962 LM3S8970
js: "C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/Settings.xs", line 458: Error: Unsupported device!
"C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/Settings.xs", line 552
"C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/Settings.xs", line 209
"C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/Settings.xs", line 121
"C:/Users/aaron/workspace_v5_4/rtostest/hello.cfg", line 12
"./package/cfg/hello_pem3.cfg", line 180
LM3S8971 LM3S9781 LM3S9790 LM3S9792 LM3S9997
LM3S9B81 LM3S9B90 LM3S9B92 LM3S9B95 LM3S9B96
LM3S9L97 OMAP4430 OMAP5430 TMS320C6A8149 TMS320C6A8168
TMS320DM8148 TMS320DM8168 TMS320TI811X TMS320TI813X TMS320TI814X
TMS320TI816X
gmake.exe: *** [package/cfg/hello_pem3.xdl] Error 1
js: "C:/ti/xdctools_3_25_00_48/packages/xdc/tools/Cmdr.xs", line 51: Error: xdc.tools.configuro: configuration failed due to earlier errors (status = 2); 'linker.cmd' deleted.
gmake: Target `all' not remade because of errors.

**** Build Finished ****

  • Additional note: I installed the latest XDC and tools now... Deleted the project and retried with similar results.


    **** Build of configuration Debug for project rtoshello ****

    "C:\\ti\\ccsv5\\utils\\bin\\gmake" -k all
    'Building file: ../hello.cfg'
    'Invoking: XDCtools'
    "C:/ti/xdctools_3_25_02_70/xs" --xdcpath="C:/ti/bios_6_35_01_29/packages;C:/ti/ccsv5/ccs_base;" xdc.tools.configuro -o configPkg -t ti.targets.arm.elf.M3 -p ti.platforms.stellaris:AM3352 -r release -c "C:/ti/ccsv5/tools/compiler/arm_5.0.4" --compileOptions "-g --optimize_with_debug" "../hello.cfg"
    making package.mak (because of package.bld) ...
    generating interfaces for package configPkg (because package/package.xdc.inc is older than package.xdc) ...
    configuring hello.xem3 from package/cfg/hello_pem3.cfg ...
    The AM3352 device is not currently supported.
    The following devices are supported in the ti.catalog.arm.cortexm4 catalog:
    LM4F110B2QR LM4F110C4QR LM4F110E5QR LM4F110H5QR LM4F110T9QR
    LM4F111B2QR LM4F111C4QR LM4F111E5QR LM4F111H5QR LM4F111T9QR
    LM4F112C4QC LM4F112E5QC LM4F112H5QC LM4F112H5QD LM4F112T9QC
    LM4F112T9QD LM4F114T9QC LM4F114T9QD LM4F11AT9QR LM4F11BT9QR
    LM4F11CT9QC LM4F11CT9QD LM4F120B2QR LM4F120C4QR LM4F120E5QR
    LM4F120H5QR LM4F121B2QR LM4F121C4QR LM4F121E5QR LM4F121H5QR
    LM4F122C4QC LM4F122E5QC LM4F122H5QC LM4F122H5QD LM4F130C4QR
    LM4F130E5QR LM4F130H5QR LM4F130T9QR LM4F131C4QR LM4F131E5QR
    LM4F131H5QR LM4F131T9QR LM4F132C4QC LM4F132E5QC LM4F132H5QC
    LM4F132H5QD LM4F132T9QC LM4F132T9QD LM4F134T9QC LM4F134T9QD
    LM4F13AT9QR LM4F13BT9QR LM4F13CT9QC LM4F13CT9QD LM4F191T9QR
    LM4F194T9QC LM4F194T9QD LM4F210B2QR LM4F210C4QR LM4F211B2QR
    LM4F211C4QR LM4F212C4QC LM4F230E5QR LM4F230H5QR LM4F230T9QR
    LM4F231E5QR LM4F231H5QR LM4F231T9QR LM4F232E5QC LM4F232H5BB
    LM4F232H5QC LM4F232H5QD LM4F232T9QC LM4F232T9QD LM4F234T9QC
    LM4F234T9QD LM4F23BT9QR LM4F23CT9QC LM4F23CT9QD LM4F290P9PDT
    LM4F290P9ZAD LM4F291T9QR LM4F292P9PDT LM4F292P9ZAD LM4F294P9PDT
    LM4F294P9ZAD LM4F294T9QC LM4F294T9QD LM4F29BT9QR LM4F29CP9PDT
    LM4F29CP9ZAD LM4F29CT9QC LM4F29CT9QD LM4F29DP9PDT LM4F29DP9ZAD
    LM4F29EP9PDT LM4F29EP9ZAD LM4FB15P9ZAD LM4FS01P9ZAD LM4FS11H5BB
    LM4FS19H5BB LM4FS1AH5BB LM4FS1BH5BB LM4FS1GE5BB LM4FS1GH5BB
    LM4FS1PE5QK LM4FS1PH5QK LM4FS200MPDT LM4FS200MZRB LM4FS210MPDT
    LM4FS210MZRB LM4FS230MPDT LM4FS230MZRB LM4FS250MPDT LM4FS250MZRB
    LM4FS270MPDT LM4FS270MZRB LM4FS2H0MPDT LM4FS2H0MZRB LM4FS2J0MPDT
    LM4FS2J0MZRB LM4FS2K0MPDT LM4FS2K0MZRB LM4FS99H5BB LM4FS99H5QD
    LM4FSXHH5BB LM4FSXLH5BB OMAP5430 SC01120E5QR SC01230H5QR
    SC01231H5QR SC01232H5BB SC01232H5QC TM4C1230C3PMI TM4C1230D5PMI
    TM4C1230E6PMI TM4C1230H6PMI TM4C1231C3PMI TM4C1231D5PMI TM4C1231D5PZI
    TM4C1231E6PMI TM4C1231E6PZI TM4C1231H6PGEI TM4C1231H6PMI TM4C1231H6PZI
    TM4C1232C3PMI TM4C1232D5PMI TM4C1232E6PMI TM4C1232H6PMI TM4C1233C3PMI
    TM4C1233D5PMI TM4C1233D5PZI TM4C1233E6PMI TM4C1233E6PZI TM4C1233H6PGEI
    TM4C1233H6PMI TM4C1233H6PZI TM4C1236D5PMI TM4C1236E6PMI TM4C1236H6PMI
    TM4C1237D5PMI TM4C1237D5PZI TM4C1237E6PMI TM4C1237E6PZI TM4C1237H6PGEI
    TM4C1237H6PMI TM4C1237H6PZI TM4C123AE6PMI TM4C123AH6PMI TM4C123BE6PMI
    TM4C123BE6PZI TM4C123BH6PGEI TM4C123BH6PMI TM4C123BH6PZI TM4C123BH6ZRBI
    TM4C123FE6PMI TM4C123FH6PMI TM4C123GE6PMI TM4C123GE6PZI TM4C123GH6PGEI
    TM4C123GH6PMI TM4C123GH6PZI TM4C123GH6ZRBI TM4C1290NCPDT TM4C1290NCZAD
    TM4C1292NCPDT TM4C1292NCZAD TM4C1294NCPDT TM4C1294NCZAD TM4C129CNCPDT
    TM4C129CNCZAD TM4C129DNCPDT TM4C129DNCZAD TM4C129ENCPDT TM4C129ENCZAD
    TM4E1231H6ZRB TM4E1237H6ZRB TM4E123GH6ZRB TM4E129BNCZAD TM4E129SNCZAD
    Vayu
    js: "C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/Settings.xs", line 458: Error: Unsupported device!
    "C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/Settings.xs", line 552
    "C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/Settings.xs", line 209
    "C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/Settings.xs", line 121
    "C:/Users/aaron/workspace_v5_4/rtoshello/hello.cfg", line 12
    "./package/cfg/hello_pem3.cfg", line 180
    gmake.exe: *** [package/cfg/hello_pem3.xdl] Error 1
    js: "C:/ti/xdctools_3_25_02_70/packages/xdc/tools/Cmdr.xs", line 51: Error: xdc.tools.configuro: configuration failed due to earlier errors (status = 2); 'linker.cmd' deleted.
    gmake: Target `all' not remade because of errors.

    **** Build Finished ****

  • Hi Aaron,

    the AM3352 is a cortex A8 not am m3.    Can you please explain the steps you are taking?   Can you send/explain your target configuration.

    Best Regards,
    Lisa 

  • I tried reinstalling CCS (I downloaded and installed CCS5.4.0.00091_win32.zip and did a complete install). I installed nothing else from TI yet. I deleted the project and started over.

    Our board is going to be using and AM3352 so, this is the selections I made.

    I want to eventually to use SYS/BIOS (and the NDK) and started the with Hello World SYS/BIOS example to make sure I have everything installed and configured properly. 

    This was the build result… Which seemed to have build successfully. Despite the platform not matching and being a AM3359 (I don't have a AM3352 choice, why?).

     

     

    **** Build of configuration Debug for project rtoshello ****

     

    "C:\\ti\\ccsv5\\utils\\bin\\gmake" -k all

    'Building file: ../hello.cfg'

    'Invoking: XDCtools'

    "C:/ti/xdctools_3_25_00_48/xs" --xdcpath="C:/ti/bios_6_35_01_29/packages;C:/ti/ccsv5/ccs_base;" xdc.tools.configuro -o configPkg -t ti.targets.arm.elf.A8Fnv -p ti.platforms.evmAM3359 -r release -c "C:/ti/ccsv5/tools/compiler/arm_5.0.4" --compileOptions "-g --optimize_with_debug" "../hello.cfg"

    making package.mak (because of package.bld) ...

    generating interfaces for package configPkg (because package/package.xdc.inc is older than package.xdc) ...

    configuring hello.xea8fnv from package/cfg/hello_pea8fnv.cfg ...

    generating custom ti.sysbios library makefile ...

    Starting build of library sources ...

    making C:/Users/aaron/workspace_v5_4/rtoshello/src/sysbios.aea8fnv ...

    clea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/BIOS.c ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/IntrinsicsSupport_asm.asm ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/TaskSupport_asm.asm ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/exc/Exception_asm.asm ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/a8/TimestampProvider_asm.asm ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/a8/Mmu_asm.asm ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/a8/Cache_asm.asm ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/a8/intcps/Hwi_asm.s470 ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/family/arm/a8/intcps/Hwi_asm_switch.s470 ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/timers/gptimer/Timer_asm.s470 ...

    asmea8fnv C:/ti/bios_6_35_01_29/packages/ti/sysbios/timers/dmtimer/Timer_asm.s470 ...

    area8fnv BIOS.obj arm_IntrinsicsSupport_asm.obj arm_TaskSupport_asm.obj exc_Exception_asm.obj a8_TimestampProvider_asm.obj a8_Mmu_asm.obj a8_Cache_asm.obj intcps_Hwi_asm.obj intcps_Hwi_asm_switch.obj gptimer_Timer_asm.obj dmtimer_Timer_asm.obj ...

    Build of libraries done.

    clea8fnv package/cfg/hello_pea8fnv.c ...

    'Finished building: ../hello.cfg'

    ' '

            1 file(s) copied.

    making ../src/sysbios.aea8fnv ...

    gmake[1]: Nothing to be done for `all'.

    'Building file: ../hello.c'

    'Invoking: ARM Compiler'

    "C:/ti/ccsv5/tools/compiler/arm_5.0.4/bin/armcl" -mv7A8 --code_state=32 --abi=eabi -me -g --include_path="C:/ti/ccsv5/tools/compiler/arm_5.0.4/include" --define=am3352 --define=omap3503 --define=am3354 --diag_warning=225 --display_error_number --diag_wrap=off --preproc_with_compile --preproc_dependency="hello.pp" --cmd_file="./configPkg/compiler.opt"  "../hello.c"

    'Finished building: ../hello.c'

    ' '

    'Building target: rtoshello.out'

    'Invoking: ARM Linker'

    "C:/ti/ccsv5/tools/compiler/arm_5.0.4/bin/armcl" -mv7A8 --code_state=32 --abi=eabi -me -g --define=am3352 --define=omap3503 --define=am3354 --diag_warning=225 --display_error_number --diag_wrap=off -z --stack_size=0x800 -m"rtoshello.map" --heap_size=0x800 -i"C:/ti/ccsv5/tools/compiler/arm_5.0.4/lib" -i"C:/ti/ccsv5/tools/compiler/arm_5.0.4/include" --reread_libs --warn_sections --display_error_number --diag_wrap=off --xml_link_info="rtoshello_linkInfo.xml" --rom_model -o "rtoshello.out" -l"./configPkg/linker.cmd"  "./hello.obj" -l"libc.a"

    <Linking>

    'Finished building target: rtoshello.out'

    ' '

     

    **** Build Finished ****

     Why do I see AM3354s in there as well?

    Given these results is this the recommended way to configure the setup. For our own custom AM3552 board, I can create a xyz.cmd linker file and lay out the address map. Is there recommend way of doing this? 

     

    Thanks,

    Aaron

     

  • Hi Aaron,

    I would not worry about this.  All of these am3x parts are closely enough related you should be able to use that platform etc.  In fact all it means is the BIOS team has not provided on for your variant, however, you can use that one or creat one if you are ambitious.

    So I hope this helps clarify and glad you have your code building and the settings are now much better.

    Best Regards,

    Lisa

  • That gets me through step one...

    Now I want use the functionality in hsi2c.h so, I created another test app the code compiles but does not link. What is recommended library or settings should I use and how should I point the tools to find the library.

    I want SYS/BIOS functionality plus the AM335x drivers (I2C, SPI, GPIO, UART, and eventually the LW IPStack)

    Thanks,

    Aaron

    **** Build of configuration Debug for project simple ****

    "C:\\ti\\ccsv5\\utils\\bin\\gmake" -k all
    making ../src/sysbios.aea8fnv ...
    gmake[1]: Nothing to be done for `all'.
    'Building file: ../main.c'
    'Invoking: ARM Compiler'
    "C:/ti/ccsv5/tools/compiler/arm_5.0.4/bin/armcl" -mv7A8 --code_state=32 --abi=eabi -me -g --include_path="C:/ti/ccsv5/tools/compiler/arm_5.0.4/include" --include_path="C:/ti/AM335X_StarterWare_02_00_01_01/platform/evmAM335x" --include_path="C:/ti/am335x_sysbios_ind_sdk_1.1.0.1/sdk/starterware/include/hw" --include_path="C:/ti/am335x_sysbios_ind_sdk_1.1.0.1/sdk/starterware/include/armv7a/am335x" --include_path="C:/ti/am335x_sysbios_ind_sdk_1.1.0.1/sdk/starterware/include" --define=am3352 --diag_warning=225 --display_error_number --diag_wrap=off --preproc_with_compile --preproc_dependency="main.pp" --cmd_file="./configPkg/compiler.opt" "../main.c"
    "../main.c", line 287: warning #179-D: variable "configData" was declared but never referenced
    "../main.c", line 288: warning #179-D: variable "ptrReg" was declared but never referenced
    "../main.c", line 265: warning #179-D: function "I2CRegRead" was declared but never referenced
    'Finished building: ../main.c'
    ' '
    'Building target: simple.out'
    'Invoking: ARM Linker'
    "C:/ti/ccsv5/tools/compiler/arm_5.0.4/bin/armcl" -mv7A8 --code_state=32 --abi=eabi -me -g --define=am3352 --diag_warning=225 --display_error_number --diag_wrap=off -z --stack_size=0x800 -m"simple.map" --heap_size=0x800 -i"C:/ti/ccsv5/tools/compiler/arm_5.0.4/lib" -i"C:/ti/ccsv5/tools/compiler/arm_5.0.4/include" --reread_libs --warn_sections --display_error_number --diag_wrap=off --xml_link_info="simple_linkInfo.xml" --rom_model -o "simple.out" -l"./configPkg/linker.cmd" "./main.obj" -l"libc.a"
    <Linking>

    undefined first referenced
    symbol in file
    --------- ----------------
    I2C1ModuleClkConfig ./main.obj
    I2CAutoIdleDisable ./main.obj
    I2CDataCountGet ./main.obj
    I2CMasterControl ./main.obj
    I2CMasterDataGet ./main.obj
    I2CMasterDataPut ./main.obj
    I2CMasterDisable ./main.obj
    I2CMasterEnable ./main.obj
    I2CMasterInitExpClk ./main.obj
    I2CMasterIntClearEx ./main.obj
    I2CMasterIntDisableEx ./main.obj
    I2CMasterIntEnableEx ./main.obj
    I2CMasterIntRawStatus ./main.obj
    I2CMasterIntStatus ./main.obj
    I2CMasterSlaveAddrSet ./main.obj
    I2CMasterStart ./main.obj
    I2CMasterStop ./main.obj
    I2CPinMuxSetup ./main.obj
    I2CSetDataCount ./main.obj
    IntAINTCInit ./main.obj
    IntMasterIRQEnable ./main.obj
    IntPrioritySet ./main.obj
    IntRegister ./main.obj
    IntSystemEnable ./main.obj

    error #10234-D: unresolved symbols remain
    error #10010: errors encountered during linking; "simple.out" not built

    >> Compilation failure
    gmake: *** [simple.out] Error 1
    gmake: Target `all' not remade because of errors.

    **** Build Finished ****

  • Hi Aaron,

    you are likely missing a library however the device forum is best to answer this so I am going to move this there for you.

    Best Regards,

    Lisa

  • Since I did not hear from anyone yet I tried an experiment...

    I copied... 

    am335x_indcomm_i2c.c from C:\ti\am335x_sysbios_ind_sdk_1.1.0.1\sdk\platform\am335x\src
    am335x_indcomm_i2c.h from C:\ti\am335x_sysbios_ind_sdk_1.1.0.1\sdk\platform\am335x\include
    am335x_indcomm_startup.h from C:\ti\am335x_sysbios_ind_sdk_1.1.0.1\sdk\platform\am335x\include
    hsi2c.c from C:\ti\am335x_sysbios_ind_sdk_1.1.0.1\sdk\starterware\drivers
    hsi2c.h from C:\ti\am335x_sysbios_ind_sdk_1.1.0.1\sdk\starterware\include

    The issues included that am335x_indcomm_i2c.c uses APIs that are not defined in hsi2c.c and also seems to not play with the one located in C:\ti\am335x_sysbios_ind_sdk_1.1.0.1\sdk\starterware\platform\evmAM335x.  

    It looked like the APIs in am335x_indcomm_i2c.c were the ones we are expected to call.

    I expect this is not the method and/or API I am supposed to use for these drivers.

    Aaron