AM1808: How to configure for Errata2.3.3

Tsurumoto

Genius 11770 points

Part Number: AM1808

I'm referring the following errata "Advisory 2.3.3"

www.tij.co.jp/.../sprz313h.pdf

I'd like to know more about above yellow sequence.

Which value should be set to which register for it?

Thanks and Best regards,

HaTa.

over 3 years ago

0 Rahul Prabhu over 3 years ago

TI__Guru** 114410 points

The only PSC corresponding to USB 2.0 is PSC1 and LPSC Number 1 as per Table 6-12 in the datasheet. The register for the module would be PSC1 MDTCL for the LPSC number 1 which I believe will be at location 0x01E27A04 [ 0x01E27A00 + 4 * 1]. To disable the module clock, you need to set the last three bit to 0x2 as per technical reference manual.

0 Tsurumoto over 3 years ago in reply to Rahul Prabhu

TI__Genius 11770 points

Thanks!

Processors

Processors forum

AM1808: How to configure for Errata2.3.3