Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TDA4VM: How to request an EB Tresos license for MCUSW/MCAL

    Part Number: TDA4VM If you want to run the EB Tresos Configurator for TDA4VM MCAL, a customer license is required. How can I obtain this?

  • [FAQ] Supporting more than 32 bit timestamp in capture node

    We use TDA4 to capture YUV422 data. We use PSDK_V07.00.00. We add log to print timestamp in the API tivxCaptureGetObjDesc(). We find timestamp will overflow when timestamp passes 0xFFFFFFFF. Timestamp will become to 0x0. We find sizeof (pending_frame_timestamp_free_q_mem…

  • [FAQ] TDA4VM: Display for more than 1920 input resolution

    Part Number: TDA4VM Dear TI, I have a custom board that working with 2560x800 resolution DSI display. I'm trying to display 2560x800 resolution image combined two camera as below using "app_multi_cam". CAM 1(1280x800) CAM 2 (1280x800…

  • [FAQ] TDA4VM: How to configure 4266MTS DDR on 7.2 SDK

    Part Number: TDA4VM Hi， I use yocto to compile mc:k3r5:u-boot-ti-staging to generate the tiboot3.bin file, and then use the SD boot method. But I found that when using the 7.2 version of tiboot3.bin, the ddr frequency is 3200M, but when using the…

  • [FAQ] PROCESSOR-SDK-J7200: how to use SBL and boot system with rootfs on eMMC

    Part Number: PROCESSOR-SDK-J7200 Other Parts Discussed in Thread: DRA821 SBL is used for fast CAN response. In the boot_app_mcu_rtos demo: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-j7200/07_03_00_07/exports/docs/mcusw/mcal_drv/docs…

  • [FAQ] TDA4VM: IPC_Test on PSDK QNX 7.2 / PSDK QNX 7.3

    Part Number: TDA4VM Is ipc_test supported on PSDK QNX 7.2 and PSDK QNX 7.3?

  • [FAQ] PROCESSOR-SDK-J721E: nvme initialization and sdk commands

    Part Number: PROCESSOR-SDK-J721E This is more of an fyi if you want to connect an NVME SSD drive to the J721 EVM. The drive i bought is https://www.amazon.com/gp/product/B08V83JZH4/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 once you get…

  • [FAQ] DRA821U: How to test RGMII with DRA821 on EVM

    Part Number: DRA821U Other Parts Discussed in Thread: DRA821 How to test RGMII configuration with DRA821 on EVM ? As only SGMII is enabled by default ?

  • [FAQ] TDA4VM: Resource table for IPC

    Part Number: TDA4VM Other Parts Discussed in Thread: SYSBIOS Where can I find the resource table for IPC application running on MCU1_0. Also, what resource table should I use when loading another core?

  • [FAQ] TDA4VM: How to Configure CPSW 5G/9G ALE

    Part Number: TDA4VM How to configure CPSW 5G/9G to add static entries ?

View FAQ threads
  • Threads 198147 Discussions