Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Other Parts Discussed in Thread: SYSBIOS Tool/software: TI-RTOS On any device (Sitara, SimpleLink, TM4C, C2000, etc), I get the following runtime error in the console:
ti.sysbios.gates.GateMutex: line 114: assertion failure: A_badContext: bad calling…
Part Number: 66AK2H14
1. How to partition the DDR3A and DDR3B memory across the ARM and DSP cores in Keystone II devices?
The EMIF for DDR3A being attached directly to MSMC has a number of advantages for both ARM and DSP cores:
1) It is closer …
Part Number: 66AK2H14
1. What's the difference between C66x XMC MPAX and MSMC MPAX in Keystone II devices?
2. If transferring data between DDR3A and L2 SRAM via EDMA in Keystone II, should MPAX setting be assigned with PrivID = 0?
3. Can MPAX translate…
Part Number: TCI6638K2K Other Parts Discussed in Thread: TCI6630K2L , 66AK2L06 , , TCI6636K2H , 66AK2H14 , 66AK2H12 , 66AK2H06 , 66AK2E05
Q: I’m developing an application based on TI’s TCI6638K2K or TCI6636K2H or TCI6630K2L or 66AK2L06 family of devices…
Part Number: TDA2P-ACD
Tool/software: Linux
Hi
I am looking at bare minimum steps required to build a rootfs of 20 MB size since I have a limited ROM size.Could you provide the necessary steps (probably the recipe file(.bb)) which can have minimum…
Part Number: TMS320C5517
The C55x CSL has an example that demonstrates waking-up the DSP core from IDLE3 via RTC.
This is an example that demonstrates waking up from IDLE3 via the INT0 pin on the C5517 using the EVM5517.
Instructions for running…
