Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] SK-TDA4VM: Enable the DFU boot mode in SK-TDA4VM.

    Part Number: SK-TDA4VM Other Parts Discussed in Thread: TDA4VM While using DFU boot on SK-TDA4VM the dfu device disappear after flashing tisp.bin.

  • [FAQ] TDA4VM: How can I forward the packet received on one external port to another port of CPSWnG with a different VLAN ID?

    Part Number: TDA4VM How can I forward the packet received on one external port to another port of CPSWnG with a different VLAN ID?

  • [FAQ] AM625SIP - Custom board hardware design - Design and Review notes for Reuse of SK-AM62-SIP Schematics

    Part Number: AM625SIP Other Parts Discussed in Thread: SK-AM62-SIP , AM625 Hi TI Experts, I am starting a new board design and planning to use TI Starter Kit (SK) design files for designing my custom board. https://www.ti.com/tool/SK-AM62-SIP …

  • [FAQ] AM6442 / AM6441 / AM6422 / AM6421 / AM6412 / AM6411 Custom board hardware design - Design and review notes for Reuse of SK-AM64B Schematics

    Part Number: AM6442 Other Parts Discussed in Thread: SK-AM64B Hi TI Experts, I am starting a new board design and planning to use TI Starter Kit (SK) design files for designing my custom board. https://www.ti.com/tool/SK-AM64B Please let me know…

  • [FAQ] AM625: AM62x + TPS6521901: Change VDD_CORE during boot to 0.85V

    Part Number: AM625 Other Parts Discussed in Thread: SK-AM62 , TPS65219 Hey, we use the AM6254 with the TPS6521901 PMIC. Our Yocto BSP is based on 09.02.00.005 and we applied the 1.4 GHz OOP for our board. This new OPP requires a higher VDD_CORE and…

  • [FAQ] J784S4XEVM: Demo application to show the usage of the read and write TISCI API for extended OTP efuse

    Part Number: J784S4XEVM Need demo application to show the usage of the read and write TISCI API for extended OTP efuse .

  • [FAQ] J784S4XEVM: Enable USB3.0 functionality on lane 2 of TDA4VH

    Other Parts Discussed in Thread: TDA4VH How to enable the USB 3.0 functionality on lane 3 of J784S4 evm?

  • [FAQ] TDA4VL-Q1: Change GTC Clock frequency to 200MHz for SBL boot flow

    Part Number: TDA4VL-Q1 For SDK 9.0 to latest, we see that the GTC frequency in the SBL boot flow is 250MHz, whereas in the SPL boot flow it is 200MHz. How to set the GTC to 200MHz in SBL?

  • [FAQ] SK-TDA4VM: Why Does Encoding Fail in TDA4VM-SK Edge-AI 9.1 SDK?

    Part Number: SK-TDA4VM Why is my basic GStreamer encode pipeline failing as a result of "Failed to allocate required memory" in Edge-AI 9.1 SDK?

  • [FAQ] AM623: RGMII Input Slew Rate for CPSW3G

    Part Number: AM623 Hi We are having trouble achieving the input slew rates of 2.64V/ns ... 5V/ns for the RGMII signals defined in the AM62x Rev B datasheet (SPRSP58B), Table 7-33. Are the values correct for 1.8V? Because the RMII interface, which uses…

View FAQ threads
  • Threads 198068 Discussions