TMUX1109: TMUX1109

A closed switch behaves like a resistor, so the propagation delay can be very short (much less than 1 ns), depending on how you measure. But the switch has a resistance and capacitance, so it will distort signals in some way. The exact behaviour depends strongly on the driving and loading conditions, so it does not make much sense to specify a propagation delay for test conditions that are not realistic for most applications. See [FAQ] How do I Approximate Propagation Delay and Channel to Channel Skew in an Analog Switch/Multiplexer?

Hello,

I agree with Clemens on this topic and please let us know if you need any other assistance.

Regards,

Kameron