CC2640R2F: Trying to debug the cc2640 launchpad program to my custom board of cc2640r2f

Dev Chandil

Part Number: CC2640R2F
Other Parts Discussed in Thread: CC2640,

I am trying to debug the cc2640 launchpad simpleblebroadcaster program into my custom board of cc2640r2f, with olimex tms320xda100v3 debugger. I have change the debug probe in project properties to xds100v3 from xds110. but receiving errors. I have attached the build log too here.7065.log.txt

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735635 points

Those errors aren't related Debugger settings. Do you change anything to original ProjectZero?

0 Dev Chandil over 8 years ago in reply to YiKai Chen

Intellectual 940 points

No just the degug probe in properties only

0 Dev Chandil over 8 years ago in reply to YiKai Chen

Intellectual 940 points

The launchpad controller is 7x7 and which I am using is 4x4.

0 YiKai Chen over 8 years ago in reply to Dev Chandil

Guru 735635 points

If you use 4x4, you have to revise board file according to your IO design.

0 Dev Chandil over 8 years ago in reply to YiKai Chen

Intellectual 940 points

I am new to CCS and BLE can you guide me how to revise a board file or any example of it.

0 YiKai Chen over 8 years ago in reply to Dev Chandil

Guru 735635 points

You can revise CC2640R2_LAUNCHXL.h under C:\ti\simplelink_cc2640r2_sdk_1_35_00_33\source\ti\ble5stack\boards\CC2640R2_LAUNCHXL referring to CC2640R2DK_4XS.h under C:\ti\simplelink_cc2640r2_sdk_1_35_00_33\source\ti\ble5stack\boards\CC2640R2DK_4XS

0 kalp garg over 8 years ago in reply to Dev Chandil

Prodigy 60 points

Check the predefined symbols into your project's app properties. There you will find a variable defining your board. Change it according to your custom baord.

If my post answers your question, please click on "Verify Answer" button to benefit others who have the same issue.

Bluetooth®︎

Bluetooth forum

CC2640R2F: Trying to debug the cc2640 launchpad program to my custom board of cc2640r2f