WL1835MODCOM8B: WL1835MODCOM8B

Hi,

I connected pins 26 (Tx) and 27 (Rx).

Futhermore I set WL_en, UART_DBG_BT and IRQ as high.

But I do not seem to get a connection with the RTTT.

Power is of course also supplied.

What am I missing?

Thank you, best regards,

Samuel

Ensure WLAN_EN and BT_EN are low

Ensure sense on reset pins are set as below 

IRQ_WL = 1, UART_DBG_BT = 1, AUD_OUT_BT = 0

Set WLAN_EN to high

Now check RTTT connection. 

Hello Mastermind,

this has resolved my issue, I finally manage to connect and download with the RTTT.

What I cannot do for now is, manipulating the Bluetooth modes  (BLE & Bluetooth Classic/ and for example hopping mode).

Is there another tool for this or does it work over the RTTT as well?

Do I need to connect to the other Uart Port? (pins 50 - 53)

If so, how do I need to configure it?

Best regards, and thank you,

Samuel