Frequent Questions

  • [FAQ] DP++ & Dual Mode Implementation using a DP redriver

    Part Number: TDP2004 Tool/software: What is Dual Mode Dual mode or DP++ allows for a DP source to output a HDMI signal to a sink without using an active protocol converter. The DP source must be DP++ capable for dual mode operation. The key considerations…

  • [FAQ] UCC21750-Q1: Schematic and Layout Recommendation

    Part Number: UCC21750-Q1 Other Parts Discussed in Thread: UCC21750 Tool/software: What is the typical required, recommended schematic and good layout practice for UCC21750Q1 and UCC21750 devices,

  • [FAQ] AM623: Could you help to provide Pinmux excel file for AX62XX?

    Part Number: AM623 Other Parts Discussed in Thread: SYSCONFIG Tool/software: Hi Expert, Could you help to provide Pinmux excel file for AX62XX? SysConfig Tool export csv file does not list MUX Mode. TDAV4VM provides MUX Mode Thanks …

  • [FAQ] PROCESSOR-SDK-AM64X: Integration of custom PHY using MCUSDK

    Part Number: PROCESSOR-SDK-AM64X Tool/software: Hi, I am designing my custom board using AM64x/AM243x + MCUSDK. But not using PHY provided on EVM/LP board. Can you provide guidance how to do this? Regards

  • [FAQ] : How to trigger DMA with the help of GPIO on AM64X/AM243 and AM62X devices ?

    Part Number: AM6412 Tool/software: Hello Users, Many users are asking to trigger DMA with the help of GPIO on AM64X/AM243 and AM62X devices. So, I have created an example of this solution on AM64X and the procedure is the same for all other devices…

  • [FAQ] TLV320AIC3104EVM-K: When testing TLV320AIC3104EVM-K preset configuration, what do I do when AC-MODEVM Controller board is used?

    Part Number: TLV320AIC3104EVM-K Other Parts Discussed in Thread: TLV320AIC3105 , TLV320AIC3106 , TLV320AIC3107 , TLV320AIC3101 , TLV320AIC34 , TLV320AIC3104 Tool/software: If you are testing the EVM of TLV320AIC3104, TLV320AIC3101, TLV320AIC3105, TLV320AIC3106…

  • [FAQ] DS320PR810: How should PCIe redriver PD pins be configured?

    Part Number: DS320PR810 Tool/software: TI PCIe Gen 5/Gen 4 redrivers have powerdown (PD or PWDN) pins. How should I configure them, and why does TI suggest connecting them to inverted PERST# or PRSNT#?

  • [FAQ] SN65DPHY440SS: What is the design constraint for DPHY440 lane 0 when using in a MIPI CSI design?

    Part Number: SN65DPHY440SS Other Parts Discussed in Thread: SN75DPHY440SS Tool/software: I'm utilizing the SN75DPHY440SS in 4 lane configuration with default configuration parameters, sourced by a CSI-2 source. Lanes 1, 2, and 3 are correctly driven and…

  • [FAQ] BQ2562x FAQs

    Other Parts Discussed in Thread: BQ25620 , BQ25628E , BQ25622E , BQ25628 , BQ25629 , BQ25622 BQ2562x FAQ Home Page This home page is for common questions in relation to the BQ25620, BQ25622, BQ25628, BQ25629, BQ25628E, and BQ25622E. FAQs …

  • [FAQ] BQ25620: How does the charge safety timer work for BQ25620, BQ25622, BQ25622E, BQ25628, BQ25628E, and BQ25629?

    Part Number: BQ25620 Other Parts Discussed in Thread: BQ25628E , BQ25622E , BQ25628 , BQ25629 , BQ25622 Tool/software: The safety timer for the BQ25620, BQ25622, BQ25622E, BQ25628, BQ25628E, and BQ25629 functions as a protection against prolonged charging…

View FAQ threads
Recommended For You