Frequent Questions

  • [FAQ] LM2105: How do I choose the best half-bridge gate driver for DC motor drive applications?

    Part Number: LM2105 Other Parts Discussed in Thread: UCC27710 How do I choose the best half-bridge gate driver for DC motor drive applications? *Update: Read more detail in the application note: How to Choose a Gate Driver for DC Motor Drives * …

  • [FAQ] TPS7H5001-SP: Duty Cycle Limits for a TPS7H500X-SP Controller

    Part Number: TPS7H5001-SP The TPS7H500X-SP family of controllers have both minimum and maximum duty cycle limits that have to be taken into account when using the controller Maximum Duty Cycle The maximum duty cycle is easier to take into account…

  • [FAQ] Sensorless BLDC Trap and Field Oriented Control (FOC) Motor Stop Options

    Other Parts Discussed in Thread: MCF8316A Brushless DC motors are widely used across market sectors and the industry is attempting to move from sensored to sensorless solutions for applications that don’t need the tight position control offered by sensored…

  • [FAQ] TDA4VM: Run vision_apps in SBL boot flow with combined_appImage

    Part Number: TDA4VM What are the steps involved in running vision_apps in SBL boot flow with combined_appImage?

  • [FAQ] TDA4VM: How to forward Broadcast frames to HLOS (QNX) running on A72 by default ?

    Part Number: TDA4VM How to forward Broadcast Frames to QNX (A72) in case of QNX+RTOS use case with Ethernet Firmware, note all my network operations were managed at QNX.

  • [FAQ] AM625: Generating Sitara AM62x/AM62Ax/AM64x GP Device bootable MMC/SD Card Images using SDK v8.6 and Yocto

    Part Number: AM625 (also applicable to other AM62x, AM62Ax, AM64x, AM65x parts with minor changes) Overview During recent releases of the Processor SDK Linux SDKs v8.x several AM6x devices such as AM62x and AM64x were transitioned from the GP (General…

  • [FAQ] BQ25620: BQ2562x Calculator Tool

    Part Number: BQ25620 Hello! Please find the attached calculator for the BQ2562x Family. BQ2562x Calculator.xlsx Regards, Mike Emanuel

  • [FAQ] When Do I Need to Reconfigure My Motor Driver’s Register Settings?

    Register settings in TI motor drivers allow you to configure specific settings to optimize motor driver performance for your particular application. Whether it is adjustable IDRIVE, dead time, or setting the overcurrent trip threshold, register settings…

  • [FAQ] Do I Still Need the Buck Components if I am Not Using the Buck of the DRV8316?

    Other Parts Discussed in Thread: DRV8316 The DRV8316 comes with an integrated buck that can support up to 200mA of current and can be used as a 3.3V or a 5V rail in a motor driver system. In some systems, however, the buck may not be needed. If this is…

  • [FAQ] TMS570LC4357: How to use different peripherals pins (like Lin, MibSPI, N2HET, ECLK and RTP) as GIO

    Part Number: TMS570LC4357 Other Parts Discussed in Thread: HALCOGEN How to use different peripherals pins as GIO, like 1. MibSPI pins as GIO 2. Lin pins as GIO 3. N2HET pins as GIO 4. ECLK pin as GIO 5. RTP pins as GIO

View FAQ threads
Recommended For You