Part Number: TPS43330A-Q1 TPS43330 EMC Comparison for SS.pdf

Part Number: TPS43330-Q1

Part Number: TPS43330-Q1

Part Number: TPS43330A-Q1 The boost controller allows the device to operate down to 2 V at the input; the duty cycle of Boost converter D = 1 – (input voltage/output voltage); so, it depends on your output voltage selection (7 V, 8.85 V, or 10 V), the…

Part Number: DP83TD510E

Sometimes a picture really is worth a thousand words, such as troubleshooting a motor and motor driver. This post discusses the signals that are the most commonly useful when debugging a running motor, and mentions some of the waveform characteristics…

Part Number: TPS6594-Q1 Yes, any BUCK feedback pin that is not being used for the BUCK feedback can be used as a voltage monitor. Unused feedback pins include FB_B3 on a 3-phase or 4-phase BUCK and FB_B4 on a 4-phase BUCK. Also, any feedback pins on…

Part Number: TPS6594-Q1 The TPS6594-Q1 and LP876x-Q1 devices have reprogrammable non-volatile memory. The memory can be updated over the device's I2C or SPI communication. This process is described in the "Scalable PMIC NVM Update Guide" https://www…

Part Number: IWRL6432 xWRL6432 and xWRL1432 are ready for evaluation! Product folder and EVM: IWRL6432 Product Folder IWRL6432BOOST EVM AWRL6432 Product Folder AWRL6432BOOST EVM IWRL1432 Product Folder IWRL1432BOOST EVM AWRL1432 Product…

Other Parts Discussed in Thread: DRV8143-Q1 , DRV8145-Q1 , DRV8144-Q1 DRV8143-Q1, DRV8144-Q1, DRV8145-Q1 has H-Variant. In H-Variant(HW interface), nSLEEP pin requires external pulse input. It should be 20us-40us pulse to wake the parts. 20us-40us…