Part Number: TPS65320-Q1 This thread applies to TPS65320-Q1. TPS65320x-Q1 Revision History.pdf

Part Number: TPS65910 This thread applies to TPS65910x. All variants based on the device are OTP programmed for specified processor; there is no any drop-in replacement for any specified variant; including the TPS65910A3A1RSLR.

Possible reason can be : - "phy_read_mmd" and "phy_write_mmd" are not supported in your kernel version (if version is old). Possible solution to be evaluated : - Change "phy_write_mmd" to "phy_write_mmd_indirect" function and do the corresponding…

Part Number: TPS65320-Q1 This thread applies to TPS65320-Q1. There is no debounce time on the UV/OV for this device; it's just a Schmitt trigger after a UV/OV comparator.

Part Number: DS90UB960-Q1 Hi Team, What is the recommended duration to run the BIST? Thanks Reed

Part Number: TDA4VM Hi TI, 1. Is there any document available to know the list of all Exception/Trap and reason for Exception (for both R and A cores)? ex: Division by zero, illegal instruction/operation, floating point exception etc. 2. Do all…

Other Parts Discussed in Thread: LDCCOILEVM , LDC1614EVM What factors do I need to consider when setting the LDC161x or LDC131x current drive?

FAQ: Logic and Voltage Translation > Voltage Translators >> Current FAQ The AXC family of Voltage Translators have built in dynamic pull-downs at the I/O. These pull-downs assist with with the glitch free power sequencing feature included in this…

For most Impedance Track TI battery gauges, a smoothing engine is used to help minimize jumps in the State of Charge (SoC) reported by the gauge. During normal operation of the gauge Full Charge Capacity (FCC) and Remining Capacity (RC) are calculated…

Other Parts Discussed in Thread: GPCCHEM , BQSTUDIO To most efficiently help debug State of Charge accuracy issues, problems encountered during the learning cycle process, or any other function related to the gauge like protection, there is some information…