Frequent Questions

  • [FAQ] AM623: clock outputs

    Part Number: AM623 We are planning to use these 3 clocks output from the AM62 SOC - CLKOUT0, to the RGMII Ethernet PHY (25MHz) - WKUP_CLKOUT0, to be used as a the master clock for a MIPI-CSI camera (typically 25MHz) - AUDIO_EXT_REFCLK1 as the master…

  • [FAQ] TPS65023: TPS65023, TPS65023B Software Resources for Register Configuration

    Part Number: TPS65023 Other Parts Discussed in Thread: , IPG-UI This thread applies to the TPS65023 and TPS65023B devices. When evaluating the TPS65023 or TPS65023B device using their respective evaluation module the most up to date software tool…

  • [FAQ] TPS650861: Evaluating the User programmable TPS650861

    Part Number: TPS650861 When evaluating the TPS650861 device with the EVM, BOOSTXL-TPS650861, or a custom board it is important to first program the device using the OTP generator tool, which can be found on the product page on TI.com and linked below…

  • [FAQ] How do I fix a SysConfig CCS Project which is not building due to "Invalid argument '--product': No product with name "C2000WARE" and version" ?

    Other Parts Discussed in Thread: SYSCONFIG , C2000WARE I added a SysConfig file to a CCS project and now the project is not building due to an error caused by the SysConfig tool. The error is shown below: Invalid argument '--product': No product with…

  • [FAQ] TPS65381A-Q1: TPS65381-Q1, TPS65381A-Q1: How to Monitor an External Regulator using TPS65381x-Q1 devices

    Part Number: TPS65381A-Q1 Other Parts Discussed in Thread: TPS65381-Q1 This thread applies to all TPS65381-Q1 and TPS65381A-Q1 devices. The VDD1 LDO controller feedback pin (VDD1_SENSE) can be used to monitor an external voltage regulator (for example…

  • [FAQ] 66AK2H12: How to flash U-Boot and Linux kernel using Shell Scripts in Processor SDK Linux

    Part Number: 66AK2H12 How to flash U-Boot and Linux kernel using Shell Scripts in Processor SDK Linux in 66AK2H12 ?

  • [FAQ] SK-TDA4VM: How do I connect the external debugger Blackhawk USB560v2 (XDS560v2) USB System Trace to the JTAG on the board?

    Part Number: SK-TDA4VM Other Parts Discussed in Thread: TDA4VM , DRA829 The SK-TDA4VM does not have an on-board debugger like the J721E EVM. How can I connect debugger to JTAG to debug remote cores?

  • [FAQ] What is the procedure to program the SHA-1 secure key?

    Other Parts Discussed in Thread: BQ40Z50-R2 The BQ40Z50-R4, BQ40Z50-R3, and BQ40Z50-R2 have the option to choose the secure memory location for SHA-1 authentication. To program the SHA-1 key into secure memory a specific sequence of commands is required…

  • [FAQ] TPS65381A-Q1: TPS65381-Q1, TPS65381A-Q1: How to Pick Feedback Resistor Values for the VDD1 LDO Controller

    Part Number: TPS65381A-Q1 Other Parts Discussed in Thread: TPS65381-Q1 This thread applies to all TPS65381-Q1 and TPS65381A-Q1 devices. When designing a system with these devices it is important to select the correct feedback resistors for the VDD1…

  • [FAQ] TPS65910: How to handle unused pins for those regulators not used?

    Part Number: TPS65910 Please follow the document linked here ; it's named "TPS65910x Schematic Checklist (Rev. B)". Please let's know if you have further questions. Thanks! Phil

View FAQ threads
Recommended For You