Frequent Questions

  • [FAQ] TPS565242: [FAQ] What is the difference between ECO mode and FCCM mode of buck converter?

    Part Number: TPS565242 Other Parts Discussed in Thread: TPS564247 Nowadays, ECO mode and FCCM mode are the most popular 2 operation mode of a buck converter. This FAQ will make a sample explanation about this operation mode, help user make a proper decision…

  • [FAQ] TI-API: What are the best practices for push API settings?

    Part Number: TI-API What are the best practices for push API settings?

  • [FAQ] Linux: How to boot Sitara AM3x/AM4x/AM6x devices from initramfs (.cpio Archive, RAM Disk)

    Other Parts Discussed in Thread: AM62P , AM62L Overview The TI SDK Yocto build environment common for all Sitara MPUs such as AM335x, AM437x, AM62x, AM62Ax, AM64x, and AM65x can be used to generate "tiny" images (via bitbake tisdk-tiny-image ) that…

  • [FAQ] BQ76952: What is the default output of PDSG/PCHG when pre-discharge and pre-charge is enabled

    Part Number: BQ76952 Hi team, What is the output voltage for PDSG and PCHG when pre-discharge and pre-charge are all enabled? Could you help to explain below EC table? I am confused the output voltage? If PCHG or PDSG is off, what would…

  • [FAQ] BQ76952: Connecting battery cells to the BQ769x2 family of monitors

    Other Parts Discussed in Thread: BQ76952 , BQ76942 How should I connect battery cells to the BQ769x2 family of monitors?

  • [FAQ] Quick Guide to Debugging Common Issues in BLDC motor drivers

    Other Parts Discussed in Thread: DRV8300 Debug of issues vary from situation to situation, but over time you will start to recognize patterns between the common problems. The following are some of the most frequently asked questions and methods for solving…

  • [FAQ] BQ76952: What is the difference between OCD1, OCD2, OCD3 and SCD?

    Part Number: BQ76952 What is the difference between the different discharge current protections, OCD1, OCD2, OCD3 and SCD?

  • [FAQ] TDA4VM/TDA4VH/TDA4VL: Is HSFOSC1 external clock required

    Other Parts Discussed in Thread: TDA4VM , TDA4VL , TDA4VH , DRA829 Part Numbers: TDA4VM/TDA4VH/TDA4VL Referencing TRM DRA829/TDA4VM Technical Reference Manual (Rev. C) SPRUIL1C the below table can be seen. Is the external clock for HFOSC1_CLK required…

  • [FAQ] TPS62125: TPS62125 Inverting Buck-Boost Application Risk

    Part Number: TPS62125 Other Parts Discussed in Thread: TPS629206 , TPS629210 , TPS629203 , Hi, The TPS62125 configured as inverting buck-boost application is very risky. We strongly recommend using our new generation buck converter TPS629203 or -Q1…

  • [FAQ] EV2400: Why is EV2400 not supported by all software from TI? Can you support it in any specific software?

    Part Number: EV2400 Other Parts Discussed in Thread: BQPRODUCTION-SINGLECELL , BQPRODUCTION , BQ-HI-PRODUCTION , Can you add support for EV2400 in BQPRODUCTION-SINGLECELL / BQ-HI-PRODUCTION / BQPRODUCTION software?

View FAQ threads
Recommended For You