Other Parts Discussed in Thread: SYSCONFIG Q1 : Does TI devices support hardware accelerators ? Q2 : What type of supports are present in the hardware ? Q3. How does application core interact with security core ? Q4. What are different configuration…

Read First: High-quality, comprehensive questions can help you solve problems faster According to your question, please follow the prompts below to select the relevant information you can provide, which will help you get fast and accurate support. …

Part Number: EVMK2G How to build, run and test the K2G UART example projects in ARM core from TI-RTOS SDK?

Part Number: EVMK2GX Explain the steps, prerequisites, and environment setup to generate the PDK example projects which come along with TI-RTOS SDK for the K2G Family of Processors.

Part Number: 66AK2H12 How to boot and run (without flashing) on the K2H board?

Part Number: EVMK2G How to build, run and test the K2G UART example projects in DSP core from TI-RTOS SDK?

Part Number: SK-AM62 Hello, I'm using the E3 SK-AM62 which has an I2C switch between the I2C-2 pins on the Expansion header and also uses a load switch on to enable 3.3V on the expansion header. I've been having a hard time getting the load switch…

Part Number: TPS22916 The TPS22916xx is an incredibly small, single channel load switch using a low leakage P-Channel MOSFET for minimum power loss available in a small, space saving 0.78 mm × 0.78 mm, 0.4-mm pitch, 0.5- mm height 4-pin Wafer-Chip-Scale…

In the AM263x IBIS Model. What is the “SC1” feature? Can it be enabled/disabled in firmware? Is this is related to silicon binning or some other functionality?

Part Number: LDC3114 Where can I find example code for the LDC3114 or LDC3114-Q1?