Frequent Questions

  • [FAQ] DP83TC812R-Q1: How can I connect PHYs back to back over RMII?

    Part Number: DP83TC812R-Q1 There are two type of mode that RMII can support: RMII normal mode and RMII Repeater mode: RMII normal mode is also known as MAC to PHY RMII connection. This mode is set as default mode in DP83TC812 so it did not need…

  • [FAQ] [H] Isolated Interfaces - Top Questions, Answered

    Other Parts Discussed in Thread: ISO1228 Quickly find solutions to common questions about isolated interface devices by clicking this link. This FAQ answers the most common questions asked about these devices …… ……… … FAQ: Isolation >> Isolated Interfaces…

  • [FAQ] [H] Digital Isolators - Top Questions, Answered

    Quickly find solutions to common questions about digital isolator devices by clicking this link. This FAQ answers the most common questions asked about these devices …… ……… … FAQ: Isolation >> Digital Isolators Digital Isolators Isolated Interfaces…

  • [FAQ] TPS6594-Q1: LP8764-Q1: How to use EVM for GUI communication with off-board IC.

    Part Number: TPS6594-Q1 Other Parts Discussed in Thread: LP8764-Q1 This topic is relevant to TPS6594-Q1 and LP8764-Q1 devices: Our EVM’s can be used for I2C or SPI communication with PMIC’s that are connected to the board via specific headers. This…

  • [FAQ] [H] Frequently Asked Questions: Isolation

    Other Parts Discussed in Thread: ISO6440 , ISO6421 , ISO6442 , ISO6420 , ISO6041 Select this link to see answers to common questions, detailed use case implementations, and part recommendations for isolation devices. . Top Isolation FAQs - All-Time…

  • [FAQ] TDA4VM: J72E : How to determine if this is a GP or HS device

    Part Number: TDA4VM HI, How to determine if this is a GP or HS device，Thank you for your help. Best regards huahui

  • [FAQ] TPS6594-Q1: LP8764-Q1: Debugging PMIC Behavior with Interrupt Interpretation.

    Part Number: TPS6594-Q1 Other Parts Discussed in Thread: LP8764-Q1 This FAQ is relevant to TPS6594-Q1 and LP8764-Q1 Devices. If your PMIC is failing to communicate via I2C or SPI, the issue is likely to lie in supply or component selection. It will…

  • [FAQ] TL431: Shunt regulator characteristics for different grades

    Part Number: TL431 What are the key parameters which changes across different grades? Which parameters don't change across different grades of shunt regulators ?

  • [FAQ] 66AK2E05: Would you please provide a "Quick start Guide for K2E - EVM " to enable a quick product development ?

    Part Number: 66AK2E05 Other Parts Discussed in Thread: SYSBIOS , CCSTUDIO , Hi, Would you please provide a "Quick start Guide for K2E - EVM " to enable a quick product development ?

  • [FAQ] 66AK2H12: UART Example project for K2H family devices

    Part Number: 66AK2H12 Explain the Code, Hardware configuration, and Implementation of the UART example project in K2E family devices?

View FAQ threads
Recommended For You