Part Number: TPS6594-Q1 How does the residual voltage check work?

Part Number: SK-AM64 Other Parts Discussed in Thread: TPIC2810 Am sharing this in case it helps others. I have spent about two days trying to First, figure out why there was no power on the 3V3 and 5V0 pins of the RPi-compatible user expansion…

Part Number: TPS6594-Q1 Other Parts Discussed in Thread: TPS6593-Q1 , This thread applies to TPS6593-Q1, TPS6594-Q1. Please download and complete the schematic checklist first and then ask TI team to review for feedback. -----------------------…

Part Number: TPS43330-Q1 This thread applies to TPS43330-Q1. In device TPS43330 (non-A version): When device in LPM and waking up EXTSUP gets shorted to VREG and that may cause a restart of the device (including running buck regulators): High-IQ in…

Part Number: TPS65320-Q1 This thread applies to TPS65320-Q1. TPS65320x-Q1 Revision History.pdf

Part Number: TPS65910 This thread applies to TPS65910x. All variants based on the device are OTP programmed for specified processor; there is no any drop-in replacement for any specified variant; including the TPS65910A3A1RSLR.

Possible reason can be : - "phy_read_mmd" and "phy_write_mmd" are not supported in your kernel version (if version is old). Possible solution to be evaluated : - Change "phy_write_mmd" to "phy_write_mmd_indirect" function and do the corresponding…

Part Number: TPS65320-Q1 This thread applies to TPS65320-Q1. There is no debounce time on the UV/OV for this device; it's just a Schmitt trigger after a UV/OV comparator.

Part Number: DS90UB960-Q1 Hi Team, What is the recommended duration to run the BIST? Thanks Reed

Part Number: TDA4VM Hi TI, 1. Is there any document available to know the list of all Exception/Trap and reason for Exception (for both R and A cores)? ex: Division by zero, illegal instruction/operation, floating point exception etc. 2. Do all…