Frequent Questions

  • [FAQ] SigconArchitect Installation

    Other Parts Discussed in Thread: SIGCONARCHITECT Downloading of SigCon Architect from TI.com and install works successfully. However, when attempting to open the SigCon Architect GUI, the GUI loads with half the GUI off-screen to the right and an error…

  • [FAQ] What interface (PH-EN or PWM) to use for controlling brushed DC motors

    Two common interfaces used to control brushed DC motors are Phase/Enable (PH/EN) and PWM. Both of these interfaces require 2 signals to be able to fully control brushed DC motors or other types of load connected to the outputs of a motor driver. Phase…

  • [FAQ] PROCESSOR-SDK-DRA8X-TDA4X: How to build sysfw.itb file for HS device?

    Part Number: PROCESSOR-SDK-DRA8X-TDA4X This article explains how to build sysfw.itb file for J7ES-HS device. It assumes that PSDKLA is installed and setup correctly as explained in the link: software-dl.ti.com/.../index.html

  • [FAQ] TLV320AIC3254EVM-K: Issue with GUI - not displaying anything - stuck at blank screen

    Part Number: TLV320AIC3254EVM-K My customer is having issues getting the Eval Board started. It is connected via USB (D2 lights up). But when the GUI is launched nothing is displayed and here is an image of what we're getting: I changed the settings…

  • [FAQ] PCM1808: Sampling rate effects on input impedance

    Part Number: PCM1808 Hello, Does the sampling rate impact the input impedance of the PCM1808? The typical value is 60kΩ at 48kHz.

  • [FAQ] How can I learn about multicore development on C2000?

    Q: How can I learn about multicore development on C2000? Take a look at the C2000 Multicore Development User's Guide ( https://software-dl.ti.com/C2000/docs/C2000_Multicore_Development_User_Guide/index.html )

  • [FAQ] Selecting Integrated FET/control BLDC Motor drivers based on Motor Datasheet

    Other Parts Discussed in Thread: DRV8313 , DRV8312 , DRV8332 , DRV10964 , DRV10970 , DRV10974 , DRV10975 , DRV10983 , DRV10983-Q1 , DRV10987 Understanding the parameters of a motor is very important in selecting a motor driver as the rating of the FETs…

  • [FAQ] Compiler/TDA2E: The steps to enable the early-boot late attach use-case in vision SDK 3.8 Linux

    Part Number: TDA2E Tool/software: TI C/C++ Compiler Hi, Can I know the steps to enable the early boot late attach use-case in vision SDK 3.8?

  • [FAQ] DRA745: How to determine if IVAHD can be used for a certain resolution and also how many instances can be supported for that resolution?

    Part Number: DRA745 I'm trying to determine this information for various resolutions in the end product.

  • [FAQ] Compiler/TDA2E: The steps to enable the early-boot late attach use-case in vision SDK 3.7 Linux

    Part Number: TDA2E Tool/software: TI C/C++ Compiler Hi, Can I know all the steps to enable the early-boot late attach use-case in vision SDK Linux?

View FAQ threads
Recommended For You