• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 1688 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65DSI86 EVM Question

Andrew Kling
Intellectual 2810 points

Can ldo and power on reset sequence control by DSI86 on the EVM?  Customer's CPU can send dcs command and video data,

Andrew

  • 0
    TI__Mastermind 18655 points

    Hello Andrew,

    The properly way to reset the device is by deasserting the EN terminal for at least 100us. When the EN terminal is asserted/deasserted the DSI lanes must be placed in LP11 state, therefore, no DSI command is supported in this state.

    Regards