Texas Instruments (TI) Bluetooth® support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search Bluetooth® IC content or ask technical support questions on everything from BAW resonator technology and Bluetooth® low energy to BLE automotive and wireless connectivity with smartphones & tablets. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: CC2340R5
If you are working with SmartRF Studio 8 versions 1.3.0 and 1.3.1 AND a CC2340R53 device, please note that SmartRF Studio's Radio Control Window might fail to detect the board.
In other words, you will see the scenario below…
Part Number: CC2745R10-Q1 Tool/software: Issue:
When trying to flash or debug a CC27XX using CCS 20.3.0, the following error is reported:
Cortex_M33_0: Flash loader: CC23xx_CC27xx_FLASH_LIBRARY_VERSION 4.1.0.141
GEL: Error while executing OnPreTargetConnect…
Part Number: CC2340R5 Tool/software: Hi all!
For those that have installed the new SimpleLink Low Power F3 SDK 9.10.00.83 (for devices CC23xx and CC27xx) you may have noticed the folder structure for the Bluetooth Low Energy (BLE) stack changed. This…
Part Number: CC2340R5 Tool/software: Hello!
A new Simple Link Academy (SLA) lab is now online! Bluetooth Low Energy (LE) and Drivers. This hands-on lab covers the basics of how to build a project that involves using TI developed driver functionalities…
Part Number: CC2340R5 Other Parts Discussed in Thread: SYSCONFIG , , CC2340R2
Tool/software: CCS Theia
Code Composer Studio is transitioning to Theia from Eclipse
Theia is an open-source initiative to provide a VS Code® “like” application framework…
Part Number: CC2340R2 Other Parts Discussed in Thread: CC2340R5
Tool/software:
Hello!
In order to migrate a project developed for CC2340R5 to CC2340R21 or from CC2340R5 to CC2340R22, please follow CC2340R5 to CC2340R21 Porting Guide and CC2340R5…
Part Number: CC2340R5
Dear users,
IAR Embedded Workbench users are recommend to use IAR 9.40.2 with F3 SDK 7.40.00.64. This information has not been properly reported in the release notes of the SDK.
Using previous IAR versions may lead to issue…
Part Number: CC2340R5
The purpose of these instructions are to detail how to merge/add multiple BLE profiles into a single project. The following is an example which uses the " data_stream_UART_over_BLE" as the base project and the "basic_ble_profiles…
This guide shows how to use SDK Composer so the size of the SDK downloaded and installed is reduced.
This guide applies to the devices supported by the SimpleLink Low Power F2 SDK (CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4) and SimpleLink Low…
Part Number: LP-EM-CC2340R5 Other Parts Discussed in Thread: CC2340R5
The following details how to modify the uart2echo SDK example to enable the event Mask, and event Callback overrun on the LP-EM-CC2340R5.
Summary:
By implementing the following…