Check the DM8168 datasheet section I mentioned earlier, it has a diagram showing what is required. The THS7360 is designed specifically for the DM8168 and has the required gains and configuration.
BR,
Steve
Hello,
I am not expert on this but you could check :
http://www.ti.com/product/THS7360
http://www.ti.com/general/docs/datasheetdiagram.tsp?genericPartNumber=THS7360&diagramId=SLOS674
Best Regards,
Margarita
Hi Brijesh,
As I know, THS7360 only need be configured in EVM board. THS7360 always enables the output by hardware setting(DIS_SD, DIS_SF pin has be connected to ground).
Is it wrong?
By the way, I could see the video display on VGA monitor using my demo…
Other Parts Discussed in Thread: THS7360 Hello community,
we are using the HD-SDI-DVR Reference design available by VVDN. I would like to add the following output configurations:
HD/SD-SDI Outputs
DVI Outputs
How can I get this to work? I'm looking forward…
Are you connecting Luma and chroma cables correctly?
If i remember correctly, in earlier evms, we need to supply 0.5V as reference voltage to VDAC_REF pin. Not sure if this is taken care correctly in your evm. Also check if there is THS7360 connected…
Other Parts Discussed in Thread: THS7375 , THS7360 Hi,
We have made a custom board with ti8107 processor & we are trying to run GA3.5 RDK mcfw decode-display file base demo on it.
The difference in our board is that we don't have THS7375 and THS7360…
Other Parts Discussed in Thread: THS7353 , THS7303 , THS7368 , THS7360 would like to use a video buffer THS7353 , to drive the analog video output from the board.
The intention is to use an input mux. for SD / HD selection as only 3 outputs are available…
VESA formats are typically not filtered in order to maximized bandwidth and sharpness, although some designs may include a ferrite bead (or just a PCB footprint) to provide some high frequency filtering. However, even a ferrite bead can result in too…