Frequent Questions

  • [FAQ] AM2634: What is Pre integrated/TI commercial stack?

    Part Number: AM2634 Tool/software: This FAQ will cover following questions: What is does Pre Integrated stack mean? What is EtherCAT HW accelerator? Which part we need to use for standard Ethernet on PRU ICSS Which part should I use for…

  • [FAQ] Most common problems encountered when developing camera applications on the AM6x

    Part Number: AM62A7 Other Parts Discussed in Thread: AM62P , AM69A , AM68A , AM67 , , AM625 , AM623 Tool/software: What are the most common problems encountered when developing camera applications on the AM6x (AM62/AM62A/AM62P/AM67/AM68A/AM69A) and…

  • [FAQ] What are the common reasons V4L2 based applications fail to capture images from a probed CSI sensor?

    Part Number: AM62A7 Other Parts Discussed in Thread: AM67 , Tool/software: I connected my CSI camera to my board and the sensor has successfully probed, but I'm not able to capture images from the camera. None of "v4l2-ctl --stream-mmap", "yavta …

  • [FAQ] What are the common reasons a CSI sensor fails to probe in V4L2 environment?

    Part Number: AM62A7 Other Parts Discussed in Thread: AM62P , , AM67 , AM625 , AM623 Tool/software: I connected my CSI camera to my board, but the sensor didn't probe. What are the possible reasons the sensor doesn't probe? Other parts: AM62A3 ,…

  • [FAQ] How to flash and boot u-boot from parallel GPMC NAND on AM62x

    Part Number: AM625 Other Parts Discussed in Thread: SK-AM62-LP Tool/software: AM62x boot rom supports booting from parallel GPMC NAND. From "5.4.9.1 GPMC NAND Bootloader Operation" in AM62x TRM "GPMC NAND boot only supports boot from ONFI 1.0 compatible…

  • [FAQ] TDA4VM-Q1: TDA4VM SR2.0 SBL and SPL boot flow

    Part Number: TDA4VM-Q1 Other Parts Discussed in Thread: TDA4VM Tool/software: Hi Customer, This FAQ will introduce the detail steps for different SDK in SBL or SPL. BR, Biao

  • [FAQ] TPS1H100-Q1: Calculating Current Limit & Junction Temperature in H, HB, & HC family High-Side Power Switches

    Part Number: TPS1H100-Q1 Tool/software: The H, HB, and HC families of high-side power switch devices implement current limit by the placement of a resistor (R ILIM ) in external circuitry connected to the chip, and the current limit can be adjusted…

  • [FAQ] TMUX1308-Q1: Fail-safe operation

    Part Number: TMUX1308-Q1 Tool/software: Hi Experts, ' Is there any guidelines to follow regarding the input when the TMUX is not powered. Can i apply input voltage when the supply is not available. Thank you for the guidance. Regards, S…

  • [FAQ] How do I find the right video device node for my CSI-2 sensor?

    Part Number: AM62A7 Tool/software: I connected a sensor to my AM62A starter kit EVM, and the sensor correctly probed. When I did "v4l2-ctl --list-devices", many "/dev/videoX" nodes were listed. Which one should be used to capture images from the sensor…

  • [FAQ] ETHERNET Master FAQ

    Part Number: ETHERNET-SW Tool/software: This Master FAQ lists serves as a point of reference to find all FAQs made by TI's Ethernet Team. Standard Ethernet How do I choose magnetics for my industrial PHY? TI Ethernet PHY Capacitive Coupling…

View FAQ threads
Recommended For You