Frequent Questions

  • [FAQ] AM62A7 / AM62A3 / AM62A1-Q1 / AM62D-Q1: Why is MMC1 powered by two different voltage supplies, VDDSHV0 and VDDSHV5 ?

    Part Number: AM62A7 Could you confirm that the voltage domains are correct for the MMC1_SDCD and MMC1_SDWP pins? The datasheet shows both MMC0 and MMC2 as having all member pins bellowing to the same voltage domain. For MMC1 however, the pins are shown…

  • [FAQ] TDA4: How to validate SysConfig PinMux Tool outputs

    Other Parts Discussed in Thread: SYSCONFIG , TDA4VH TI’s SysConfig PinMux Tool is a GUI interface which allows the user to select the desired device pin configurations for their system. The SysConfig PinMux Tool outputs customer-selected configurations…

  • [FAQ] TMS320F28003x,TMS320F28004x: Flash API usage advisory/errata

    Other Parts Discussed in Thread: C2000WARE Below Errata Advisory is applicable for TMS320F28003x,TMS320F28004x devices with more than one flash bank. We will add this advisory to the respective device errata document soon. Also, we will update the flash…

  • [FAQ] C2000WARE: Stuck trying to port over to new C2000ware version

    Part Number: C2000WARE What are some common issues that arise when porting over old C2000WARE versions to the newest C2000WARE versions? How can I resolve them?

  • [FAQ] MSPM0-SDK: How to exclude syscfg from build in CCS project using MSPM0-SDK 1.30.0.03

    Part Number: MSPM0-SDK Other Parts Discussed in Thread: SYSCONFIG , MSPM0G3507 Environment: 1. CCS: 12.6.0.00008 2. SysConfig: 1.19.0 3. MSPM0 SDK: 1.30.00.03 Stpe 1: Import a project from SDK and Rebuild project: empty_LP_MSPM0G3507_nortos_ticlang…

  • [FAQ] AM623: A few more questions about decoupling as I couldn’t find anything in the TI documentation regarding some pins of the AM62X:

    Part Number: AM623 Team, A few more questions about decoupling as I couldn’t find anything in the TI documentation regarding some pins of the AM62X: Do the following pins need their own decoupling capacitors (it doesn’t look like the TI EVM had…

  • [FAQ] AWR2944: X-Ray Sensitivity

    Part Number: AWR2944 Other Parts Discussed in Thread: AWR2E44 TI does not typically specify acceptable x-ray levels on the device datasheet. Experience has shown that most TI products will NOT be sensitive to typical x-ray inspection (with typical…

  • [FAQ] TDA4VM: How to configure RGMII clock delay on J7 devices?

    Part Number: TDA4VM How to configure RGMII clock delay on J7 devices?

  • [FAQ] Where do the MAC addresses for AM62x and AM64x come from? How do I change the MAC addresses?

    Hi TI Expert, I am developing on an AM62x SKEVM and an AM64x EVM and I'm planning on using Ethernet. Where do the MAC addresses associated with the Ethernet interfaces on these EVMs originate from? How do I change the MAC addresses?

  • [FAQ] DP83TG720S-Q1: Where can I find the latest Linux Drivers for DP83TG720 and DP83TG812/3/4?

    Part Number: DP83TG720S-Q1 Attached are the latest drivers tested on Kernel 5.10: GitHub - TexasInstruments/ti-ethernet-software: Repository for Ethernet PHY drivers for Linux and RTOS. The DP83TC812 driver can be used for the DP83TC813 and DP83TC814…

View FAQ threads
Recommended For You