Frequent Questions

  • [FAQ] AM623: Package ALW contact pressure specification for thermopad

    Part Number: AM623 Hi champs! In customer's current AM6232 design they have to use a heat sink on top of MPU. A “ThermoPad” is then used between the heat sink and AM6232. In order for this to work correctly, a certain amount of contact pressure…

  • [FAQ] Announcing New GUI Application for Ethernet EVM & PHY Evaluation

    All, Excited to share the initial release of DIEP (Debug Interface for Ethernet PHYs). The Windows GUI is designed to simplify the process for PHY-level configuration and debug with register access. Using a valid USB connection to an on-board MSP…

  • [FAQ] What are the Enable/Disable pin differences between UCC215XX and UCC2155X product families?

    What are the Enable/Disable pin differences between UCC215XX and UCC2155X product families?

  • [FAQ] TDA4VM: Stream camera of 2 datatypes using 2 Capture nodes and 2 Graphs on the same csi-rx instance

    Part Number: TDA4VM How to Send a YUV input and a raw input from a sensor to the same CSI-RX instance at a time?

  • [FAQ] TMS570LC4357: How to use Digital Watchdog

    Part Number: TMS570LC4357 Other Parts Discussed in Thread: HALCOGEN , Explain how to create NMI interrupt and RESET generation using digital watchdog in the case of failed to feed the watchdog!

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM625-Q1 / AM625SIP : Custom board hardware design – Processor power-sequencing requirements for power-up and power-down

    Other Parts Discussed in Thread: AM62A74 , AM62A7-Q1 , AM6422 , TPS65220 , AM6442 , SK-AM62B-P1 , AM625 , AM625-Q1 Hi TI Experts, I have the below queries regarding SOC(Processor) power-sequencing requirements for power-up and power-down 1.Is…

  • [FAQ] BQ25600: How does JEITA apply to the BQ25600, BQ25600D, BQ25601, BQ25601D, and BQ25606 as it relates to charge voltage and charge current?

    Part Number: BQ25600 Other Parts Discussed in Thread: BQ25601D , , BQ25606 , , BQ25601 The JEITA guideline was released on April 20, 2007 to improve the safety of charging Li-ion batteries. The BQ25600, BQ25600D, BQ25601, BQ25601D, and BQ25606 chargers…

  • [FAQ] DP83869-EP: Ethernet compliance Testing failure when interfaced to AM64x

    Part Number: DP83869-EP Other Parts Discussed in Thread: DP83869 Hi Team, I have a customer testing ethernet compliance 1G on the AM64x EVM. They have the same implementation on their custom board and seeing similar failures. There are some failures…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM625-Q1 / AM625SIP : Custom board hardware design – Power sequencing between SOC (Processor) and the Attached devices (Fail-safe)

    Other Parts Discussed in Thread: AM625 , AM625-Q1 , AM620-Q1 , AM62A3 , AM62A7 , AM625SIP , AM623 Hi TI Experts, I have the below queries regarding Power supply sequencing between SOC (Processor) and the Attached devices Can I power the SOC (Processor…

  • [FAQ] IWRL6432: Steps Rapid Debugging on the IWRL6432

    Part Number: IWRL6432 Other Parts Discussed in Thread: UNIFLASH Writing code to the IWRL6432 can be accelerated using a few developer tips. Here is a sequence of steps that may accelerate rapid iteration on software. Much of the information here is…

View FAQ threads
Recommended For You