Part Number: TMP61 Is there a fit replacement for the discontinued KTY81 or KTY82 PTCs?

Part Number: AM623 Hi, TI Partner Follow data sheet. it describe as below. DDR Subsystem (DDRSS) – Supports LPDDR4, DDR4 memory types – 16-Bit data bus with inline ECC – Supports speeds up to 1600 MT/s – Max addressable range • 8GBytes with DDR4…

4540.DP83825I VOD Adjustment.pptx

Part Number: ADS1602 Other Parts Discussed in Thread: ADS1601 , ADS1606 , ADS1605 , ADS1625 , ADS1626 What are recommended reference options for the ADS1601, ADS1602, ADS1605, ADS1606, ADS1625, and ADS1626 devices?

Part Number: PROCESSOR-SDK-J721E DSS WB path can take input from the overlay manager output and overlay manager in the DSS can take input from two video pipelines and can blend the images and can send it out. In the current PSDKRA6.0, SDK supports only…

Part Number: AM623 SPI data pins are named as D0 and D1. Where can i find information about the usage regarding in/output or which one is MISO / MOSI?

Part Number: BQ25882 Other Parts Discussed in Thread: BQ25883 , BQ25886 There is a BATFET between the system (SYS) and the battery (BAT) in the integrated boost chargers BQ25882, BQ25883, and BQ25886. The BATFET separates the system voltage and the battery…

Part Number: DP83TG720R-Q1 SGMII signal is high frequency low-voltage differential signal. Both layout design and measurements need to be accurate for good eye diagram capture. Common board design guidelines: 100ohms+/-10% differential traces…

Other Parts Discussed in Thread: MSPM0L1306 Automatically set the LOAD_VALUE into TIMx.CTR via TIMx.CCCTL.LCOND is not work for period capture. It will have influence on "Period Capture" mode and "Combined Pulse Width and Period Time" mode. (Only use…

Other Parts Discussed in Thread: STRIKE Is there a risk of latch-up with ESD diodes? Should this be taken into design consideration?