Frequent Questions

  • [FAQ] TI-PD-ANALYZER: FAQ

    Part Number: TI-PD-ANALYZER Tool/software: WHAT IS THE TI PD ANALYZER? The TI-PD-ANALYZER is a low-cost Power Delivery Analyzer and can be used to monitor and log USB type-C power delivery (PD) data by monitoring the configuration channels (CC1…

  • [FAQ] TDP2004: What is DisplayPort Pre-emphasis and how does a linear re-driver impacts it

    Part Number: TDP2004 Tool/software: What is DisplayPort Pre-emphasis and how does a linear re-driver impacts it?

  • [FAQ] ISOM8110: How do I design ISOM8110 to have the best timing performance for switching applications?

    Part Number: ISOM8110 Tool/software: FAQ: Isolation >> Opto-Emulators >> Current FAQ The ISOM8110 is designed for analog behavior. Switching performance is possible and depends on the circuit design. However, we need to pay attention to the test…

  • [FAQ] TDA4VM: gPTP Synchronization Failure over MAC2MAC connection in ETHFW or PDK ENET example.

    Part Number: TDA4VM Tool/software: Facing issue with gPTP synchronization when using a MAC2MAC connection in either the ETHFW or PDK ENET example.

  • [FAQ] TDA4VH-Q1: How do I configure CPSW MAC Port as gPTP clock Master/Slave in Ethernet Firmware (ETHFW) or ENET examples?

    Part Number: TDA4VH-Q1 Tool/software: How do I configure/enable CPSW MAC Port as either gPTP clock Master or clock slave in Ethernet Firmware (ETHFW) or ENET examples?

  • [FAQ] LP-AM261: Running gPTP TimeSync applications on AM261x LaunchPad

    Part Number: LP-AM261 Tool/software: Hi experts, Can you help me figure out the answers to the following questions about running gPTP (IEEE802.1AS) examples on AM261x-LP using the v10.02 SDK. When running the gPTP examples with DP83826 Industrial…

  • [FAQ] AM2612: How to test gPTP on AM261x Launchpad

    Part Number: AM2612 Tool/software: Hi experts, Can you help me understand how to test gPTP examples on the AM261x LaunchPad boards? Can I probe the TimeSync signal to see the output?

  • [FAQ] TDA4VH-Q1: How to implement vx_delay functionality using graph parameters

    Part Number: TDA4VH-Q1 Tool/software: As per tiovx documentation, It is not recommended to use vx_delay objects when using pipelining with TIOVX. The delay objects will unintentionally create serializations in the graph and break the desired pipelining…

  • [FAQ] LP-AM261: Frequently asked questions related to AM261x LP

    Part Number: LP-AM261 Other Parts Discussed in Thread: UNIFLASH Tool/software: This FAQ will cover frequently asked questions about AM261x-LP

  • [FAQ] TMS570LC4357: Clarification of ADC reference voltage on TMS570LC4357 HDK board

    Part Number: TMS570LC4357 Tool/software: In this FAQ i want to clarify the ADC reference voltage selection on TMS570LC4357 HDK board.

View FAQ threads
Recommended For You